Manual

STEP 6. Grip the frame with one hand and the slide

with the other (Figure 13). Now push the slide rearward

to properly align the disassembly notch. Snap the slide

stop pin into place by pressing up and against the

slide stop detent.

STEP 7. Push the slide

fully forward. Slip the

recoil plug over the end

of the recoil spring.

Using the barrel bushing

wrench apply and

maintain pressure on the

plug, gently and gradually

push the spring and plug

into the slide far enough

so that you can rotate the

barrel bushing with the

wrench counter-clockwise

slightly and hold the plug

in place (Figure 14).

Figure 13

DISASSEMBLY

NOTCH

FRAME

SLIDE

Figure 14

SLIDE

STOP

BARREL

BUSHING