Manual

26
STEP 9. With barrel bushing already removed, push
barrel link forward and remove the barrel through the
front of the slide.
If your pistol requires further work it should be done at an
Authorized Service Center or at the factory.
REASSEMBLY
P14•45, P13•45, P18•9 and P14•45 Limited, P13•45
Limited, P16•40 Limited Only. Go to Page 33 for
P12•45/P12•45 Limited.
Figure 11
STEP 8. To remove the barrel
bushing from the barrel,
turn the bushing counter-
clockwise and then push
the barrel and bushing
forward to the point that
the bushing is clear of the
slide and can be removed
from the barrel
(Figure 11).
BARREL
BUSHING
BARREL
SLIDE
DO NOT DISASSEMBLE YOUR PISTOL
ANY FURTHER.
DO NOT REMOVE OR ALTER ANY PARTS,
ESPECIALLY SAFETY PARTS.
BEFORE PROCEEDING MAKE SURE YOU ARE
WEARING SAFETY GLASSES AND KEEP THE
MUZZLE OF THE PISTOL POINTED
AWAY FROM YOUR FACE.