Manual

24
STEP 4. Pull back on hammer spur to cock the hammer.
STEP 5. Push the slide back to the point that the slide stop
lug is directly opposite the disassembly notch (Figure 8).
Then push the rounded end of the slide stop pin, on the
right side of the receiver, inward and through the receiver
and out the left side.
Figure 8
DISASSEMBLY
NOTCH
SLIDE
STOP
SLIDE STOP
SLIDE
STOP LUG
Figure 9
Disengage slide stop from the slide by removing slide stop
completely from the receiver (Figure 9).