Manual

23
Figure 7 Figure 6
RECOIL
SPRING
PLUG
BARREL
BUSHING
BARREL
BUSHING
WRENCH
RECOIL
SPRING
PLUG
STEP 3.
Using the barrel bushing wrench provided press down the
recoil spring plug (located below the muzzle) while at the
same time, rotating the barrel bushing clockwise for
about a quarter (1/4) turn so as to free the plug and
recoil spring (Figure 6).
Continue to apply pressure on the recoil spring plug to
prevent ejection of it and the spring. Then gently and
gradually allow the spring and the recoil spring plug to
extend out of the slide (Figure 7).
BEFORE PROCEEDING MAKE SURE YOU ARE
WEARING SAFETY GLASSES AND KEEP THE
MUZZLE OF THE PISTOL POINTED
AWAY FROM YOUR FACE.