User Manual

- 07 -
WARNING
Read and understand this entire owner’s manual, including all safety information, before
plugging in or using this product. Failure do to so could result in electric shock, fire, serious injury,
or death.
Power
Plug the power cord into a 110-120V Volt 12 Amp grounded outlet (see IMPORTANT SAFETY INFORMATION on
Pages 2 and 3).Make sure the outlet is in good condition and that the plug is not loose.NEVER exceed the
maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
This electric fireplace can be operated by the TOUCH PANEL, located on the BOTTOM right side glass panel
of the fireplace, or by the battery-powered REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all
warnings.
Small remote control
Touch Panel
Touch panel/Remote control Operation
BUTTON FUNCTION ACTION & INDICATION
POWER
ON: Enables control panel functions and remote
control.Turn on flame effect.
OFF: Disables control panel functions and remote
control. Turn off flame effect.
1. Press once. Indicator light turns on. Power turns on.
All functions enabled.
2. Press
COLOR button: Makes the color flame effect
changing.
1. Press once. Flame color effect gets changing.
2. Press again until desired setting is reached.
FLAME button: Makes flame effect dimmer and brighter.
NOTE: Flame effect stays on until power button is turned
off. Flame effect must be on for heater to turn on.
1. Press once. Flame brightness effect gets changing.
2. Press again. Until desired setting is reached.
HEATER button:Turn heater on and off.
NOTE: To prevent overheating, the heater fan will
blow out cool air for 30 seconds after the heater turn
off.
1. Press once. Indicator lights up. 750W heater turns
on and blows warm air.
2. Press again. Indicator lights up. 1500W heaters
turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air for 30 seconds to allow
heater to cool down, then turns off.
TEMPERATURE button: Control temperature settings
to choose temperature as desired.
Setting range from 62F to 82F.
1. Press once. Indicator light turn on. Temperature
is set to 62F.
2. Press again until desired setting is reached. LED
display show setting.
TIMER button: Control timer settings to turn off
fireplace at selected time.
Settings range from 1 hours to 8 hours.
1. Press once. Indicator light turn on. Temperature
is set to hours.
2. Press again until desired setting is reached. LED
display show setting.
COLOR
FLAME
HEATER
TEMP
TIMER