User Guide
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Regulatory Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired Network Settings (For wired network printer models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Pantum Mobile Print
- 7. Print
- 8. Control Panel
- 9. Routine Maintenance
- 10. Troubleshooting
- 11. Product Specification
5-6
1) Use WPS method to perform steps below to start wireless network on printer. (Please refer
to Chapter 5.1.2 for detailed WPS configuration)
2) Judge if the printer is successfully connected according to the status of Wi-Fi indicator
on printer. If conguration failed, please click “Previous” to congure again; if conguration
succeeded, please click “Done” to complete conguration.
Note: • If the printer cannot be used normally after wireless network setup is finished,
please install the drive again.