Frequently Asked Questions
Table Of Contents
- P2200W/P2500W Serial Printers FAQ:
- ① Installation Issues:
- 1. How to set up my Pantum P2500W Series Printer to a Wireless Network easily by one click installation? ( applicable to Wi-Fi or network models)
- 2. How do I setup a password for my WI-FI Connection? ( applicable to Wi-Fi models)
- 3. Where can I download the soft wares and drivers for my printer P2500W?
- 4. How to solve the wireless Connection Failed when it showed "The printer cannot connect to any wireless network with the wireless credentials provided"?
- 5. What’s the WIFI default password of printer’s wireless hotspot?
- 6. How to Close WIFI Hotpot Setting?
- 7. How to install the Printer with hostname？
- 8. Where can I check the Hotspot IP address？
- 9. When I connect the printer with PC by WI-FI, Why it need more than 5 minutes from I send the order until it finally print out?
- 10. How to connect the printer under Mac system with cable Setting Guide?
- 11. How to print wirelessly with Mac- WIFI Direct via P2500W series printer?
- 12. How to print wirelessly with Mac- Under same Network Environment?
- ② Cartridge Issues:
- 1. How do I replace or install a cartridge?
- 2. How do I check the amount of toner left in my cartridge?
- 3. How do I check how many pages I have printed so far?
- 4. What are the cartridge models for P2500 series printer?
- 5. How about the standard page yield of toner PA/PB/PC-210?
- 6. Why the second LED shows orange when I install a new cartridge?
- 7. What does the Blinking Lights notifications mean in P2500 Printer?
- 8. How to check the toner’s serial number location:
- 9. How to check the printer’s serial number location:
- 10. Why the printout is not clearly and a little whitish which one I just bought?
- 11. What’s the meaning of status displayed by LED indicator??
- ③ Papers Issues:
- 1. How can I clear any paper jam?
- 2. Why the printer could not feed paper successfully?
- 3. What kinds of paper can I use in my Pantum P2500W series printer?
- 4. How to print multipage on one page?
- 5. How to adjust letter format in the printing document?
- 6. How to adjust envelope type in the printing document?
- ④ Printer Compatible Issues:
- 1. Does my Pantum Printer works on Windows Mobile?
- 2. Is my printer Mac compatible? What are the versions that it is compatible with?
- 3. Is my printer Linux compatible? What are the versions that it is compatible with?
- 4. Is my printer Windows compatible? What are the versions that it is compatible with?
- 5. Could I download the APP from Google Play?
- 6. Is my printer compatible with Chrome OS system?
- 7. Is my printer compatible with Linux OpenSuse system?
- 8. Is my printer compatible with Linux Debian 9 system?
- ⑤ Mobile Printing Issues:
- ⑥ General Settings Issues:
- ⑦ Normal Printer Issues:
- 1. How to get the printer to print darker under Windows?
- 2. How to get the printer to print darker under Mac?
- 3. How to “add a printer “by manually under Windows?
- 4. How to “add a printer “by manually under Mac?
- 5. How to do Duplex Printing on Windows system?
- 6. How to cancel the “duplex printing” under Windows?
- 7. How to cancel a printing job in the queue?
- 8. Why it will be smoked when printing?
- 9. What is the power requirement will be need?
- 10. How to Print PRN File setting in printer?
- 11. How to do when it shown “0x000000709” Error？
- 12. How to change the printing port is available when it showed” Printing port is on used”?
- 13. How to download the User Manual Successfully?
- 14. How to register for printer warranty on-line?
- 15. How to Print Information Pages from P2500 printer?
- 16. Why the printer could not print the horizontal line in the page when printed out?
- 17. How to do Duplex Printing on Mac system?
11 / 79
Step8： Disconnect equipment and printer, when reconnect them, it should input the password
as step 7 setting.
Remark
Here is the way to recover factory default setting in case customer forgets the password:
1) Turn off the printer power switch.
2) Press the “cancel / continue” button until the printer turn on and enter standby mode. ( It will take 5
seconds with pressing the button)