System Instruction

ASSIGNSMARTCANISTER™:
1. Place SmartCanister™ on Base Unit. Base Unit Reads "Assign SmartCanister™?”
2. Press SPOON button.
3. Using the SPOON button, toggle through the Ingredient list and press the
SPOON button to select an ingredient. The system will read: "Assigned"
followed by the ingredient name. (All stored information about the ingredient
will be stored for the SmartCanister™ on the NFC tag.)
4. Using the UNIT button, select the desired default unit of measure then press the
SPOON button. The system will then proceed to ASSIGNED SMARTCANISTER™
steps.
AUTODISPENSING:
A. ASSIGNED SMARTCANISTER™:
1. Place a SmartCanister™ on the base unit. The system will read the
Ingredient Name followed by: "Enter Amount to Dispense.”
2. Using the SPOON button, scroll to the desired quantity. Press the SPOON
button to confirm the quantity. The system reads: “Press Spoon to
Dispense”
Note:Upon selecting the unit of measure for each SmartCanister™, each
SmartCanister™ will default to the last selected UNIT. If you would like to
change the unit of measure, press the UNIT button to select the new unit of
measure, then use the SPOON button to scroll to the desired quantity. Press
the SPOON button to dispense.
3. Make sure your bowl is in place and press the SPOON button to begin
dispensing. Once complete, the system reads: "Dispensing Complete", then
returns to the “Press Spoon to Dispense” state, ready to dispense the same
quantity again.
4. To dispense the same quantity again, press the SPOON button to dispense
again. To change the quantity, scroll the SPOON button to select the new
desired quantity.
5. When finished, press the BACK button or remove the SmartCanister™ from
the base to complete dispensing.
B. UNASSIGNED SMARTCANISTER™:
1. Place the SmartCanister™ on the Base Unit. The base Unit Reads "Assign
SmartCanister™?” Press BACK to Exit.
2. Using the SPOON button, scroll to the “Auto Dispense” option and press the
SPOON button.
3. Using the UNIT button, select the desired unit of measure. (Note:Only
weightunitsareavailableforunassignedSmartCanisters™.Assignthe
SmartCanister™todispenseusingavolumeunit.)The system reads: “Enter
Amount”