System Instruction
● Assure the SmartCanister™ lid (1) is affixed to the canister
● Mount the SmartCanister™ (2) onto the appliance.
Use SwitchingON/OFF(Fig.A)
Before you proceed, we need you to pay attention to the following notes:
● Do not switch on the appliance when the SmartCanister™ is empty.
● Do not leave the appliance switched on continuously for more than thirty
minutes.
● If you want to use the appliance again, wait for 1-2 minutes between two
continuous cycles.
● To switch on the appliance with the continuous function, press the required
function button , refer to the table below to set the correct function, to switch
off the appliance, press the ON/OFF switch.
OPERATIONINSTRUCTIONS:
INITIAL SETUP:
To begin setting up your PANTRYCHIC™ System for the first time:
1. PLUG IN BASE UNIT.
2. TURN POWER SWITCH ON. Switch is located on the bottom right side of the
base unit.
3. FOLLOW SYSTEM PROMPTS. The first time Base unit is turned to the ON
position, reads:
a. "Hello! To begin Setup, Press SPOON Button"
The Setup Menu below will begin upon pressing the "SPOON" Button. Turn the SPOON
button to move through each menu and press it to make selection. Menu Prompts and
selections are as follows:
1. LANGUAGE (English, Spanish, French)
2. AUTO OFF (0-60min)
3. SOUND (ON/OFF)
4. BLUETOOTH (ON/OFF)
Upon completing the Initial Setup prompts, system will read:
"Setup Complete. Insert SmartCanister™ on Base Unit."
INSERT/REMOVESMARTCANISTER™ON
BASEUNIT