System Instruction

SMARTCANISTERS™

Rinse SmartCanisters™ before initial use. Using the spray attachment and a little soapy

water, wash SmartCanisters™ and lids. Make sure the SmartCanisters™ are

COMPLETELY dry before putting ingredients inside. Once they are completely dry,

pour the desired dry ingredient (refer to ingredient list on pages 7-8 for verified

ingredients) into the SmartCanister™. Firmly press the lid on the top of the

SmartCanister™ to create an airtight seal.

NOTE: SmartCanisters™ are airtight to preserve ingredients. They CANNOT BE

STORED on top of the Base unit as the airtight seal is not secured while on the

dispensing unit. Please store SmartCanisters™ on a flat hard surface in a dry cool area

such as your cabinet, countertop or pantry. After use, reconstitute the airtight seal by

removing the SmartCanister™ from the base unit and securely pressing it on a flat

surface. This will push the bottom cap into compliance.



INITIALUSEPREPARATION



Clean the appliance. Refer to the section "Cleaning and Storing".

Assembly(Fig.B)

Before you proceed, we need you to pay attention to the following notes:

● Before assembly or disassembly, switch off the appliance, remove the plug from

the wall socket and wait until the appliance has cooled down.