User's Manual

70
71
02
03
04
05
06
07
01
5. When you are nished with a full session, you will reach a screen that reads
“
Adaptation Complete ”.
PROMPTS
Allows you to select voice command system characteristics.
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
3. Tools , 1. Voice Commands .
2. Press the Right Soft Key
[ Settings ] and then select 4. Prompts .
3. Select
1. Mode , 2. Audio Playback or 3. Timeout , then press the OK Key.
• Mode: Select the voice command system mode from the following:
- Prompts: For handset to prompt for required information.
- Readout+Alerts: For handset to prompt for required information and readout the
contents of the screen and phone alerts.
- Readout: For handset to prompt for required information and readout the contents
of the screen.
- Tones Only: For handset to provide beeps only for audio guidance.
•
Audio Playback: Allows audio playback to play through the speakerphone or earpiece.
Select
Automatic , Speakerphone or Earpiece .
• Timeout: Select a period of time either 5 seconds or 10 seconds which the system
listens for a command before timing out.
4. Select an option and press the OK Key [ SET ].
ABOUT
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
3. Tools , 1. Voice Commands .
2. Press the Right Soft Key
[ Settings ] and then select 5. About .
3. The Nuance version appears.
4. To return to the previous screen, press the CLR Key
or Right Soft Key
[ Back ].
CALCULATOR
The Calculator allows you to perform simple mathematical calculations. To access the
calculator:
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
3. Tools , 2. Calculator .
2. Follow the instructions below to calculate 8×6÷4-2.5=9.5
• Input 8 and then Press the Directional Key right.
• Input 6 and then Press the Directional Key
left.
• Input 4 and then Press the Directional Key
down.
• Input 2 and then press the
to input (.).
• Input 5 and then press the OK Key and you will see the answer (9.5).
3. To reset, press the Left Soft Key [ Clear ].
• Directional Key right : X
• Directional Key down : -
• Directional Key left : ÷
• Directional Key up : +
• * Key : .
• Left Soft / CLR Key : Clear
• OK Key : =
• To change the displayed number from positive (+) to negative (-) and vice versa,
press # Key
.
• Press the Right Soft Key [Operator] to use parenthesis 1. (, 2. ) and 3. Exponent.
TIP CALCULATOR
Allows you to calculate the tip and determine how much each person should pay for
the bill.
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
3. Tools , 3. Tip Calculator .
2. Input the amount in the
Total Bill eld and Press the Directional Key
down.