User's Manual

40
41
02
03
04
05
06
07
01
ADDING OR CHANGING GROUPS
To organize your Contacts into groups:
1. From idle mode, press the Right Soft Key [ Contacts ], then highlight the
desired Contact entry.
2. Press the Left Soft Key
[ Edit ].
3. Highlight
Group and press the Left Soft Key [ Set ]
4. Select
Family or Work , then press the OK Key [ MARK ]. To create a new group,
press the Right Soft Key
[ New ], enter the new group name, then press
the OK Key [
SAVE ].
5. Press the Left Soft Key
[ Done ] to set the group.
6. Press the OK Key [
SAVE ] to update the contact entry.
CHANGING THE CALL RINGTONE
To identify who is calling by setting dierent ringtones for dierent phone numbers in
your Contacts:
1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft
Key
[ Contacts ], then highlight the desired entry.
2. Press the Left Soft Key
[ Edit ].
3. Highlight
Ringtone , then press the Left Soft Key [ Set ].
4. Select the new ringtone, then press the OK Key.
Press the Left Soft Key [Play] to listen to a highlighted ringtone or press the Right
Soft Key
[Options] to view the le information before you press the OK Key.
5. Press the OK Key [ SAVE ] to update the contact entry.
ADDING OR CHANGING THE PICTURE
To select a picture to assign to a Caller ID:
1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft
Key
[ Contacts ], then highlight the desired entry.
2. Press the Left Soft Key
[ Edit ].
3. Highlight
Picture , and press the Left Soft Key [ Set ].
4. Press the Directional Key
up, down, left or right to select a picture then
press the OK Key.
5. When completed, press the OK Key [
SAVE ] to update the contact entry.
ADDING OR CHANGING AN EMAIL ADDRESS
To enter or add an Email address to a Contact entry:
1. From idle mode, press the Right Soft Key [ Contacts ], then highlight the
desired entry.
2. Press the Left Soft Key
[ Edit ].
3. Highlight
Email 1 or Email 2 .
4. Enter an Email address using the QWERTY Keypad, then press the OK Key
[
SAVE ] to update the contact entry.
ADDING A SPEED DIAL ENTRY
To add an entry to Speed Dial:
1. From idle mode, press the OK Key to unlock the keypad, press the Right Soft
Key
[ Contacts ], then highlight a desired entry.
2. Press the Left Soft Key
[ Edit ].
3. Highlight the phone number you want to add to Speed Dial, then press the
Right Soft Key
[ Options ].
4. Select
1. Set Speed Dial , then press the OK Key.
5. Select a Speed Dial location, then press the OK Key [
SET ].
6. Select
Yes and press the OK key.
7. Press the OK Key [
SAVE ] to update the contact entry.
Using the QWERTY Keypad press the corresponding speed dial number to select the
desired speed dial location.