User's Manual

32
33
02
03
04
05
06
07
01
Wait (w)
The phone stops dialing until you press the SEND Key or OK Key to advance to the
next number.
1. Enter the phone number.
2. Press the Right Soft Key
[ Options ].
3. Select
2. Add Wait and press the OK Key.
4. Press the SEND Key
to dial or the Left Soft Key [ Save ] to save.
MAKING AN INTERNATIONAL CALL
1. Press and hold the * Key . The + required for international calls appears.
2. Enter the country code, area code, and phone number, then press the SEND
Key
.
3. To end the call, press the END Key
.
3-WAY CALLING
With 3-Way Calling, you can talk to two people at the same time. When using this
feature, normal airtime rates will be applied for each of the two calls.
1. Enter the phone number you wish to call, then press the SEND Key .
2. Once you have established the connection, enter the second phone number
you wish to call and then press the SEND Key
.
3. When you’re connected to the second party, press the SEND Key
again to
begin your 3-Way call.
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the rst to hang up, all three calls will
be disconnected.
CALL WAITING FUNCTION
If you are on a call and you receive another incoming call, you will hear a beep and the
caller’s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
1. To answer another call while on the phone, press the SEND Key .
This places the rst call on hold. To switch back to the rst caller, press the SEND
Key
again.
CALLING A NUMBER FROM CONTACTS
1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key
[ Contacts ].
2. Select the Contact entry and press the OK Key [
VIEW ], then select the desired
phone number.
3. Press the SEND Key
to place the call.
Selecting the Contact entry and then pressing the Send Key will dial the Default
Number of the Contact entry automatically.
ADJUSTING VOLUME
TO ADJUST THE MASTER VOLUME:
1. From idle mode, press the OK Key to unlock the keypad, then press the Volume
Keys
/ up or down.
2. Select one of the following options and press the OK Key [
SET ] to save it.
All Sounds O / Alarm Only / Vibrate Only / Low / Medium Low / Medium /
Medium High
/ High
• Press the Volume Keys / up or down to adjust Earpiece volume during a call.