User's Manual

INSTALL BATTERY

1. Insert your ngernail into the slot(1), then push down on

top of the battery cover and slide it o to remove (2).

2. Slide the battery into the slot (3) by aligning the contacts

and push down (4) until you hear the “click”.

3. Align the cover tabs with the slots on the back of the

device and slide the battery cover onto the unit until it

snaps into place.

If the battery is not correctly placed in the compartment,

the handset will not turn on and/or the battery may detach

during use.

Correct Incorrect

REMOVE BATTERY

1. To remove the battery cover, insert your ngernail into

the slot(1), then push down on top of the battery cover

and slide it o (2).

2. Insert your ngernail into the slot (3) and lift the battery

from the compartment (4).

3. Align the cover tabs with the slots on the back of the

device and slide the battery cover onto the unit until it

snaps into place.

CHARGING YOUR BATTERY

1. Connect the USB data cable into the cableless wall

adapter.

2. Plug the USB data cable into the phone’s Charging/

Data Jack (making sure to align the connector as it

appears in the image to the right) and the wall adapter

end into an electrical outlet.

If the battery connector is not properly aligned, damage could occur to the charging

connector and the phone may not charge.

Correct Incorrect