User's Manual

100
101
02
03
04
05
06
07
01
4. A conrmation message appears in the display, select Yes , and then press
the OK Key.
5. After reading the message that appears, press the OK Key.
6. Enter the four-digit lock code. The phone will turn o and then back on
again automatically.
SYSTEM SELECT
You can set your phone to search or roam on another network when you are not in your
home area. Leave this setting as default unless you want to alter the system selection as
instructed by your service provider.
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
7. Phone Settings , 8. System Select .
2. Select one of the following settings, then press the OK Key [
SET ].
• Automatic: Scans radio channels based on the Automatic setting.
• Home Only: Network is available only within your home area or home aliated area.
The automatic setting can be displayed as Automatic B and Automatic A depending
on PRL.
NAM SELECTION
Enables Auto NAM (Number Assignment Modules) or manually selects a NAM.
AUTO NAM
Automatically switches the phone to proper NAM when you have multiple NAM
registrations.
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
7. Phone Settings , 9. NAM Selection .
2. Select
1. Auto NAM , then press the OK Key.
3. Select
On or O , then press the OK Key [ SET ].
CHANGE NAM
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
7. Phone Settings , 9. NAM Selection .
2. Select
2. Change NAM , then press the OK Key.
3. Press one of the following settings to select:
• NAM1 : Set the phone to save the phone information that is set by default
• NAM2 : Set the phone to save phone information that is set for the other phone
number
This setting is available only when you register two cell phone numbers on your
phone.
CALL SETTINGS
ANSWER OPTIONS
To determine how to answer an incoming call:
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
8. Call Settings , 1. Answer Options .
2. Select
Any Key or Auto with Handsfree , then press the OK Key [ MARK ].
Any Key is the default setting for this device.
3. Press the Left Soft Key [ Done ].
• Auto with Handsfree will function after about ve seconds.
• Auto with Handsfree is available only when a headset or handsfree device is
connected.
• To answer all incoming calls, press the SEND Key .
AUTO RETRY
To set a period of time the phone waits before automatically redialing when an
attempted call fails:
1. From idle mode, press the [ MENU ], then select 9. Settings & Tools ,
8. Call Settings , 2. Auto Retry .
2. Select one of the following settings, then press the OK Key [
SET ].
10 Seconds / 30 Seconds / 60 Seconds / O