User's Manual

Chapter 4 Menu Function 69
2. Press the Right Soft Key [ ] [Settings] and 1.
Confirm Choices.
You can also access Voice Commands Settings from
idle mode, by pressing the OK Key to unlock the keypad,
press the Left Soft Key [ ] [MENU], swivel to the
QWERTY keypad and press 9. Settings & Tools, 6.
Phone Settings, 3. Voice Commands Settings, 1.
Confirm Choices.
3. Select Automatic, Always Confirm or Never
Confirm, then press the OK Key [SET].
SENSITIVITY
The Sensitivity setting allows you to adjust the
sensitivity monitoring of voice tones. If you frequently
experience the messages “Please try again” or
“COMMAND NOT RECOGNIZED Try again?”, adjust
the sensitivity toward Less Sensitive. If you frequently
experience false activations (when the phone
recognizes a name you didn’t say), adjust the
sensitivity toward More Sensitive.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], swivel to
the QWERTY keypad and press 9. Settings & Tools, 2.
Tools, 1. Voice Commands.
2. Press the Right Soft Key [ ] [Settings], 2. Sensitivity.
3. Select More Sensitive, Automatic or Less Sensitive,
then press the OK Key [SET].
ADAPT VOICE
Voice Command is speaker independent, which
means that no training or adaptation is required. Some
users with heavy accents or unusual voice
characteristics may find difficulty in achieving high
accuracy with speaker independent Voice Command,
so the Adapt Voice feature allows users to dramatically
improve the recognition accuracy after adapting their
voices. Users who get acceptable recognition accuracy
will find no additional benefit to performing the Adapt
Voice.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], swivel to
the QWERTY keypad and press 9. Settings & Tools, 2.
Tools, 1. Voice Commands.
2. Press the Right Soft Key [ ] [Settings], 3. Adapt Voice.
3. Select 1. Train Voice or 2. Reset Voice, then press
the OK Key.
y Train Voice: Requires that you make recordings of your voice to
customize the voice recognitions system. It will take a few
minutes.
y Reset Voice: Once you finish the adaptation process, you can
reset the adaptation to factory default. Reset Voice option only
appears after you finish the Train Voice process.