User Manual

77
·Postpone: The message is placed in the WAP PUSH inbox.
·Ignore: Deletes the received message.
2. Press the [Options] Soft key [
] on the Push Message Alerting
screen.
·Exit: Saves and exits the Push Message service.
• Acknowledge
1. Press the [Options] Soft key [
] on the Push Message Alerting
screen.
· Accept: Shows the information for the selected message.
2. Press the [Options] Soft key [
] on the Push Message Alerting
screen.
· Reject: Deletes the received message.
• Off
Does not accept messages.
• Silent
When the user receives a push message, it is saved to the Inbox
without an alert. The push message icon appears on the idle screen.
When the user receives an SL (Service Load) message
• Auto
When the user receives a message, it attempts an automatic
connection with the corresponding URL. Only an alert occurs.
• Acknowledge
1. Press the [Options] Soft key [
] on Push Message Alerting
screen.
·Accept: Shows the information for the selected message.
2. Press the [Options] Soft key [
] on the Push Message Alerting
screen.
· Reject: Deletes the received message.
• Off
Does not accept messages.
• Silent
When the user receives a push message, it is saved to the Inbox
without an alert. The push message icon appears on the idle screen.
Go to URL
This function allows you to directly input the address of a URL and
connect to it.
1. Press the [Menu] Soft key [
] then select 8.Connectivity then
select 1.WAP then select 5.Go To URL.
2. Input the URL you want to go to, then press the [OK] key.
Profiles
This function selects or edits WAP connection profiles on your phone.
NOTE: The settings for your WAP service are already entered as
required by your service provider. Care should be taken when you
make any modification to a profile since it may cause WAP to be
inoperative.
Your phone is compatible with OTA (Over The Air) messages. These
are used by service providers to send connection details directly to
your phone. Please ask your service provider for details of this
service.
1. Press the [Menu] Soft key [
] then select 8.Connectivity then
select 1.WAP then select 6.Profiles.