User Manual

43
User ID: The ID used to sign in to the e-mail server.
Password: The password used to sign in to the e-mail server.
• Outgoing Server: The SMTP server used to send e-mail.
Address : The address of SMTP Server
User ID: The ID used to sign in to the e-mail server.
Password: The password used to sign in to the e-mail server
SMTP Authenticate: If set to On, then the username and
password are used to authenticate your identity when you
send e-mail messages using the SMTP protocol.
• Save Message: Specifies whether e-mail messages are saved in
the Sent Box after they are sent. Press the [Left] or [Right] scroll
key to select either On or Off.
• E-Mail Bearers: The Internet data connection used to connect to
the e mail server:
GPRS: Select this item then press the [Edit] Soft key to edit the
APN Name, Login ID, and Password.
CSD: Select this item then press the [Edit] Soft key to edit the
Dial Number, Login ID, Password, and Modem Type (ISDN or
Analog).
• CB Msg.
Before you can receive Cell Broadcast (CB) messages, you must
configure the following settings.
• Language: Specifies the language of CB messages your phone
will receive.
• Info. Subjects: Specifies the subject of CB messages your phone
will receive:
Standard: Predefined subject list.
Custom: User-defined subject list.
• Receive: Press the [Left] or [Right] scroll key to specify whether
or not you want to receive CB messages.
• Voice Mail
Before you can access the voice mailbox provided by your network
service provider, you must configure the following settings.
• Call: Calls the predefined voice mail system to check whether
you have voice mail.
• Voice Mail Number: Specifies the voice mail recipient number
manually.
Memory Info.
This function displays the amount of used and available memory on
your phone.
Press the [Menu] Soft key then select 1.Messages then select
8.Memory Info, then press the [OK] key.