User Manual

42
• Gateway
• IP Address: The IP address. A point is added after every 3 digits.
• IP Port: The IP port number.
• Login ID: The ID used to sign in to the GPRS service
• Password: The password used to sign in to the GPRS service.
• APN: The Access Point Name.
• Login ID: The ID used to sign in to the GPRS service.
• Password: The password used to sign in to the GPRS service.
DNS Settings: The IP addresses for the Domain Name Servers. You
can enter the primary and secondary DNS. This function is available
only when you are connected to HTTP.
Bearer: Press the [Left] or [Right] scroll key to select either GPRS
Only or GSM Only.
Message Lifetime:
Allows you to set the duration of time your message is stored at the
message centre while attempting to deliver it.
Auto Download:
Specifies whether you receive multimedia messages automatically on
your phone or you are notified of receiving a multimedia message.
Press the [Left] or [Right] scroll key to select either On or Off.
Save Message:
Specifies whether multimedia messages are saved in the Sent Box
after they are sent. Press the [Left] or [Right] scroll key to select
either On or Off.
Read Report:
Specifies whether the message recipient sends you a ‘Read Report’
when the message is read.
Delivery Report:
Specifies whether the network informs you
whether or not your
message has been delivered.
• E-mail
Before you can send and receive E-mail messages, you must
configure the following settings.
Press the [Menu] Soft key then select 1.Messages then select 7.
Setting and then select 3.E-mail.
Max. Message Download Size:
Defines the maximum size of E-mail messages downloaded. If the
E-mail message is larger than the specified size, it is truncated. Press
the [Left] or [Right] scroll key to select between 30KB, 60KB, 100KB,
and 300KB.
E-mail Accounts:
Specifies the list of E-mail accounts. Press the [OK] key to delete,
rename, set as the default, or edit the selected account. The default
account is the account, which is used to send E-mails. The default
account cannot be deleted. When you choose to edit an account, you
can configure the settings below.
You can also create a new account.
• User Display Name: The name, which appears in sent E-mail
headers.
• E-mail Address: Your E-mail address.
• Incoming Server: The POP3 server used to receive e mail.
Address : The address of the POP3 Server