User Manual

41
• Delete: Deletes the template.
Settings
Before you can send or receive messages using your phone, you
must configure their settings first. This information is normally
provided by your service provider.
Press the [Menu] Soft key then select 1.Messages then select
7.Settings and then press the [OK] key.
• Text Msg.
Before you can send and receive text messages, you must configure
the following settings.
Press the [Menu] Soft key then select 1.Messages then select
7.Setting and then select 1.Text Msg..
• Message Centre: The number of your SMS center, required
when sending a message. You must obtain this number from
your service provider.
• Message Lifetime: The length of time your message is stored at
the message center while attempting to deliver it.
• Message Type: The message type: Normal, Fax, Voicemail,
ERMES, National Paging, X.400, or Internet. The service
provider’s network converts text messages sent from your phone
to the selected format.
• Receive to: The location where a text message is stored after it
is received. If the storage space of the selected location is full,
the message is saved in the other storage location. Press the
[Left] or [Right] scroll key to choose either Phone or SIM.
• Save Message: Specifies whether the completed message is
saved in the Sent Box after it is sent. Press the [Left] or [Right]
scroll key to choose either On or Off.
• Delivery Report: Specifies whether the network informs you
whether or not your message has been delivered.
• Multimedia Msg.
Before you can send and receive multimedia messages, you must
configure the following settings.
Press the [Menu] Soft key then select 1.Messages then select 7.
Setting and then select 2.Multimedia Msg..
MMS Profile:
• Profile Name: Input the profile name.
• Home URL: Input the connection URL.
• Connection Type: Select WAP or HTTP.
GSM Settings
• Gateway
• IP Address: The IP address. A point is added after every 3 digits.
• IP Port: The IP port number.
• Login ID: The ID used to sign in to the gateway.
• Password: The password used to sign in to the gateway.
• Data Call Type: Press the [Left or [Right] scroll key to choose
either ISDN or Analog.
• Dial Number: The dial number.
• Login ID: The ID to sign in via GSM.
• Password: The password used to sign in via GSM.
GPRS Settings