User's Manual

New Contacts Icons
Mobile1 Group
Mobile2 Picture
Home Ringtone
Work Fax
E-mail 1 Message Ringer
E-mail 2 Speed Dial
Message Icons
New/Unread Message
Unopened Message
Notification
Opened/Read Message
Opened Download
Picture Message
Message Delivered Corrupt Message
Incomplete Delivery
Pending Sent
Message
Sent Message,
Delivery Failed
Unread MMS
Message Locked Read MMS
Text Message Draft
Unread WAP Push
Message
Picture Message Draft
Read WAP Push
Message
Priority
Multiple Delivered
Messages
12 Chapter 1 − Before Using CDM8975
Before UsingBefore Using
Message Icons
Multiple Failed
Messages
Multiple Pending
Message
Multiple Incomplete
Message
Multiple
Acknowledged SMS/
MMS
INSTALL BATTERY
1. Remove the battery cover from the unit.
2. Slide the battery into the slot located at the
bottom of the unit and press down.
3. Slide the battery cover back onto the unit.
REMOVE BATTERY
1. To remove the battery, push down on the
top of the battery while inserting your
finger into the slot and pulling up from the
back of the battery and slide it out.
2. Align the cover tabs with the slots at the
back of the device and slide the battery
cover top onto the unit.
If the battery is not correctly placed in the compartment, the handset will not turn on
and/or the battery may detach during use.
Before Using CDM8975 − Chapter 1 13
Before UsingBefore Using
080803_CDM8975_RAP_REV00.indd 12-13080803_CDM8975_RAP_REV00.indd 12-13 2008.8.14 10:35:59 AM2008.8.14 10:35:59 AM