User's Manual

4. Press the OK Key [OK] to select “Ye s”. A confirmation message
appears.
SORT GROUP
1. From standby mode, press the OK Key [MENU], and press
6. PTT Group.
2. Press the Right Soft Key
[Options].
3. Select “Sort”.
4. Press the Directional Key
up or down to select “Alphabetical” or
“Presence” to add then press the OK Key [OK].
TEMP PTT GROUP
1. From standby mode, press the OK Key [MENU], and press
4. PTT Contact List.
2. Press the Directional Key
up or down to highlight the existing
Contact entry.
3. Press the Right Soft Key
[Options].
4. Press ”3. Temp PTT Group”.
ADD PTT CONTACTS
1. Press “1. Add PTT Contacts”.
2. Press the Directional Key
up or down, then press the OK Key
[MARK], or press the Right Soft Key [Mark All] to select
Temp PTT Group members. Press the Left Soft Key [Done] to
select PTT Contacts.
3. The phone will connect to the network and update Contact
information. A Confirmation message will appear on the display
when the transaction is complete.
ENTER NUMBER
1. Press “2. Enter Number”.
2. Enter the phone numbers into the phone number field.
3. Press the Directional Key
up or down to highlight the next
phone number fields and enter additional phone numbers if you
need to add more PTT contacts.
4. Press the OK Key
[OK] to add selected PTT Contacts.
34 Chapter 3 − Push to Talk
Push to TalkPush to Talk
5. The phone will connect to the network and update Contact
information. A confirmation message will appear on the display
when the transaction is complete.
VIEW TEMP PTT GROUP MEMBERS
1. From standby mode, press the OK Key
[MENU], and press
4. PTT Contact List.
2. Press the Directional Key
up or down to highlight the existing
Contact entry.
3. Press the Right Soft Key
[Options].
4. Press ”3. Temp PTT Group”.
5. Press the Directional Key
up or down to highlight the existing
Temp PTT Group members.
6. Press the OK Key
[VIEW] to display existing Temp PTT Group
members.
ERASE TEMP PTT GROUP MEMBERS
1. From standby mode, press the OK Key
[MENU], and press
4. PTT Contact List.
2. Press the Directional Key
up or down to highlight the existing
Contact entry.
3. Press the Right Soft Key
[Options].
4. Press ”3. Temp PTT Group”.
5. Press the Left Soft Key
[Erase].
6. Press the Directional Key
up or down, then press the OK Key
[MARK], or press the Right Soft Key [Mark All] to select
Temp PTT Group members. Press the Left Soft Key [Done] to
erase selected Temp PTT Group Members.
7. The phone will connect to the network and update Contact
information. A confirmation message will appear on the display
when the transaction is complete.
Push to Talk − Chapter 3 35
Push to TalkPush to Talk
080803_CDM8975_RAP_REV00.indd 34-35080803_CDM8975_RAP_REV00.indd 34-35 2008.8.14 10:36:12 AM2008.8.14 10:36:12 AM