User's Manual

CALL VIBRATE
1. From standby mode, press the OK Key
[MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 2. Call Sounds, 2. Call Vibrate.
2. Press the Directional Key
up or down to select “On/Off”, then
press the OK Key
[OK].
ALERT SOUNDS
To select the alert type for a new message:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 3. Alert Sounds.
2. Press the Directional Key
up or down to select “1. TXT Message”,
“2. Pic/Video/Voice Message”, “ 3. Voicemail” then press the OK Key
[OK].
3. Press the Directional Key
up or down to select “Tone”, “ Vibrate”,
“Reminder”, then press the OK Key [OK].
• Tone: Press the Directional Key up or down to select a ringer, then press the OK Key
[OK]. To play the alert tone, press the Left Soft Key [Play].
• Vibrate: Press the Directional Key up or down to select “On/Off”, then press the
OK Key [OK].
• Reminder: Press the Directional Key up or down to select “Once”, “ Every 2 Minutes”,
“Every 15 Minutes”, “ Off”, then press the OK Key
[OK].
EMERGENCY TONE
To set the alert for emergency dialing.
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 3. Alert Sounds, 4. Emergency Tone.
2. Press the Directional Key up or down to select one of the
following settings, then press the OK Key [OK].
Alert/Vibrate/Off
KEYPAD VOLUME
To set the keypad volume:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 4. Keypad Volume.
2. Adjust the volume by pressing the Directional Key
up or down,
then press the OK Key [OK] to save the setting.
68 Chapter 5 − Menu Function
SettingsSettings
SERVICE ALERTS
To set any of the three Alert options to either On or Off:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 5. Service Alerts.
2. Press the Directional Key
up or down to select one of the
following options, then press the OK Key
[OK].
• ERI: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the display
screen informing the handset user of which systems the wireless device is using as
compared to the service plan they purchased. The ERI Banner text changes to tell
a customer if they are using the: “Verizon Wireless Network”, “Extended Network”
or “Roaming”.
• Minute Beep: Alerts you every minute during a call.
• Call Connect: Alerts you when the call is connected.
3. Press the Directional Key up or down to select “On/Off”, then
press the OK Key [OK].
DEVICE CONNECT
Allows you to turn the Device Connect On or Off:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 6. Device Connect.
2. Press the Directional Key
up or down to select “On/Off”, then
press the OK Key
[OK].
POWER ON/OFF
To set the phone to sound a tone when the phone is powered on/off:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 4. Sounds
Settings, 7. Power On/Off.
2. Press “1. Power On” or “2. Power Off”.
3. Press the Directional Key up or down to select “On/Off”, then
press the OK Key [OK].
DISPLAY SETTINGS
Allows you to customize the display.
EASY SET UP
To set up display options using the Easy Set-Up Wizard:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 5. Display
Settings, 1. Easy Set Up.
Menu Function − Chapter 5 69
SettingsSettings
080803_CDM8975_RAP_REV00.indd 68-69080803_CDM8975_RAP_REV00.indd 68-69 2008.8.25 5:31:10 PM2008.8.25 5:31:10 PM