User's Manual

FREQUENCY
Press the Directional Key
left or right to select a setting for the
alarm (Once, Daily, Mon - Fri, Weekends).
RINGER
Press the Left Soft Key
[Set] to “1. Get New Ringtones” or select
the alert tone you wish to set. Press the Left Soft Key
[Play]
to preview a ringtone. Press the OK Key [OK] to make your
selection.
4. To save an alarm setting, press the OK Key
[SAVE].
TURN ON/OFF THE ALARM SETTING
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key [Options].
3. Select “Turn On/Turn Off” then press the OK Key
[OK].
RESET THE ALARM SETTING
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key
[Options].
3. Select “Reset Alarm”, then press the Directional Key
up or down
to select “Yes ”, then press the OK Key
[OK].
RESET ALL ALARM SETTINGS
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
4. Alarm Clock.
2. Press the Directional Key
up or down to highlight an Alarm
(1, 2, or 3), then press the Right Soft Key [Options].
3. Select “Reset All”, then press the Directional Key
up or down
to select “Yes ”, and then press the OK Key [OK].
98 Chapter 5 − Menu Function
ToolsTools
STOP WATCH
Simultaneously times up to eight different events. To operate the stop watch:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
5. Stop Watch.
TO MEASURE A TIME PERIOD
1. To start the stop watch, press the OK Key [START].
2. To pause it, press the OK Key
[STOP].
3. To resume it, press the OK Key
[START].
4. To reset it, press the Right Soft Key
[Reset].
TO TIME UP TO EIGHT EVENTS AT ONCE:
1. To start the stop watch, press the OK Key [START].
2. To stop a time period and continue measuring another one,
press the Left Soft Key
[Lap].
3. To stop the second and continue measuring a third one, press the Left
Soft Key
[Lap].
4. To measure up to eight time periods, repeat the above steps.
5. To stop the stop watch, press the OK Key
[STOP].
6. To review the results, press the Left Soft Key
[View].
7. To return to the stop watch, press the OK Key
[OK].
8. To reset it, press the Right Soft Key
[Reset].
WORLD CLOCK
To display the time and date in pre-programmed cities:
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
6. World Clock.
2. Press the Left Soft Key
[Cities] to access the CITIES LIST.
Press the Directional Key up or down to select the city, then
press the OK Key [OK]. Or, press the Directional Key left, or
right to select your city using the world map.
3. The world map appears with the city, its date, and time.
Menu Function − Chapter 5 99
ToolsTools
080803_CDM8975_RAP_REV00.indd 98-99080803_CDM8975_RAP_REV00.indd 98-99 2008.8.25 5:31:38 PM2008.8.25 5:31:38 PM