User's Manual

5. Repeat steps 1-4. When you are finished with a full session, you
will reach a screen that reads “Adaptation Complete”.
PROMPTS
Allows you to select the voice command system characteristics.
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
1. Voice Commands.
2. Press the Right Soft Key
[Settings], “5. Prompts”.
3. Select “1. Mode” or “2. Audio playback” by pressing the Directional
Key
up or down, then press the OK Key [OK].
• Mode: Select the voice command system mode from the following:
- Prompts: For handset to read out voice command prompts.
- Readout: For handset to read out prompts, dialing digits and menus.
- Tones Only: For handset to prompt you with a tone only.
• Audio playback: Allows audio playback to play through the speakerphone or
through the earpiece. Select “Automatic”, “ Speakerphone” or
“Earpiece” by pressing the Directional Key up or down.
CALL ALERT
Provides audible readout of the phone number and/or name (if in your contact list) of
an incoming call.
1. From standby mode, press the OK Key [MENU], the Directional
Key
right twice for SETTINGS & TOOLS, and press 2. Tools,
1. Voice Commands.
2. Press the Right Soft Key
[Settings], “6. Call Alert”.
3. Select “Ring Only”, “ Caller ID + Ring” or “Name Repeat” by pressing
the Directional Key
up or down, then press the OK Key
[OK].
ABOUT
1. From standby mode, press the OK Key [MENU], the Directional
Key right twice for SETTINGS & TOOLS, and press 2. Tools,
1. Voice Commands.
2. Press the Right Soft Key
[Settings], “7. About”.
3. The VoiceSignal version appears.
4. To return to the previous screen, then press the OK Key
[OK].
94 Chapter 5 − Menu Function
Voice ToolsVoice Tools
CALCULATOR
The Calculator allows you to perform simple mathematical calculations.
To access the calculator:
1. From standby mode, press the OK Key [MENU], the Directional
Key
right twice for SETTINGS & TOOLS, and press 2. Tools,
2. Calculator.
2. Follow the instructions below to calculate 8×6÷4-2.5=9.5
• Input 8 and then press the Directional Key right.
• Input 6 and then press the Directional Key left.
• Input 4 and then press the Directional Key down.
• Input 2 and then press the to input (.).
• Press 5.
• Then press the OK Key and you will see the answer (9.5).
3. To reset, press the Left Soft Key [Clear].
• Directional Key right : X, Directional Key down : -,
Directional Key
left : ÷, Directional Key up : +, * Key : .,
Left Soft Key
: Clear, OK Key : =.
• To change the displayed number from positive (+) to negative (-) and vice versa,
press # Key
.
• Press the Right Soft Key [Operator] to use parenthesis “1. (”, “ 2. )” and
“3. Exponent”.
CALENDAR
The Calendar tool provides easy and convenient access to your schedule.
Simply store your appointments and your phone will alert you to them.
1. From standby mode, press the OK Key [MENU], the Directional
Key
right twice for SETTINGS & TOOLS, and press 2. Tools,
3. Calendar.
Shortcut: In idle mode, press the Directional Key down to access Calendar.
2. Press the Directional Key up, down, left or right to highlight the
scheduled day.
3. Press the Left Soft Key
[Add].
4. The Appointment field is highlighted. Enter the name of the event.
Press the Directional Key
down to set the other fields for the
event:
APPOINTMENT
Use the keypad to enter an appointment in your schedule.
START TIME
Use the keypad to set a start time and press the Left Soft Key
for “am/pm”.
Menu Function − Chapter 5 95
ToolsTools
080803_CDM8975_RAP_REV00.indd 94-95080803_CDM8975_RAP_REV00.indd 94-95 2008.8.25 5:31:34 PM2008.8.25 5:31:34 PM