User's Manual

9
6:CLEAR 1:CLR PHONEBOOK
2:CLR SCHEDULE
3:CLR CALL LOGS
4:CLR HOME CALLS
5:CLR ROAM CALLS
7:VERSION
BASIC FUNCTIONS
MAKING A CALL
1 Enter the phone number.
How to modify the phone number
You have entered:
To erase the last number entered:
Press ,
To erase all numbers entered and
start again: Press and hold
for more than half of a second.
2 Press [SEND].
“CALL FAILED” message is displayed
when the call does not connect.
If the line is busy, press [END/P].
Retry by pressing [SEND].
If you select the AUTO RETRY
function, the call will be retried
automatically for the time you
have selected.
Press [END/P] to end the call.
BASIC FUNCTIONS
PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail and
calling cards). To insert Pauses:
1 Enter phone number,
then press .
2 Select desired pause.
- When idling status; - When Receiving call status;
1 : STORE 1:STORE
2 : BY NUMBER 2:SEND PHONE#
3: HARD PAUSE 3:SCRATCH PAD
4:ONE HYPHEN 4:MUTE
5:VIEW PHONE#
6:HARD PAUSE
7:ONE HYPHEN
8:VOICE PRIVACY
Pause Definitions
HARD PAUSE: If you enter the pause character (P).
the number entered after the Pause character will be sent
after the number dialed.
3 Press [SEND] to dial or [1] to store.
BASIC FUNCTIONS
HOW TO ANSWER CALLS
1 When phone rings or LED blinks press any key
except Volume or up , down.
2 To end the call, press [END/P].
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 21)
CALLER ID FUNCTION
when there is an incoming call, the
caller’s phone number is displayed
on the screen.
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
This function notifies you there is an incoming call when you
are on the phone.
To answer the call, press [SEND] when you hear the beep.
To switch back to the first caller, press [SEND] again.
XXX-XXXX-XXXX
CALL
00:00:01
XXX-XXXX-XXXX

XXXPXXXXXXXXP