User's Manual

• Select “NEC PCI to USB Open Host Controller” (Windows XP) from the

“Safely Remove Hardware” window. Then, click STOP.

• Select “NEC PCI to USB Open Host Controller” (Windows XP) from the “Stop

a Hardware drive” window and click OK.

• The “Safe to Remove Hardware” message will appear. Click OK.

• Now, you can remove the PC5740 from your laptop. When removing the

PC5740, always grip the either sides of the card rather than the top and

bottom of the card. Gripping the top and bottom of the cards and pulling the

card and put pressure on the antenna and cause damage. Use the Card

Ejector tool on your laptop, if it is available.

When Inserting and removing the

PC Card, grip both sides.

Do not handle or remove the PC

Card by pulling on the antenna.

PC5740 User’s Manual