User Manual

80
change this item.
- DNS Settings: Enter the IP address for the Domain Name
Server. You may enter primary and secondary DNS. This
function is available only when you are connected to HTTP.
- Bearer: This lets you select the bearer type for each type of
network access. Using the left or right navigation key allows you
to select from the two modes: GSM Only and GPRS Only.
- Reset Profile: Pressing the [OK] key initializes the parameter
settings of a profile. You can select from Yes/No.
Cache [1.9]
Cache Mode [1.9.1]
Sets up the Cache memory check.
- Always Check: The Cache is always checked whenever a URL
is loaded.
- Never Check: The Cache is never checked.
Clear Cache [1.9.2]
This menu provides a function to clean the data stored in the Cache
(recently visited WAP pages).
Security Cert [1.10]
You can see the saved security certificate.
Press the [Option] Soft key [
] to;
 Delete: Deletes a security certificate.
 Delete All: Deletes all security certificates.
Version [1.11]
This function is for viewing the software version of the WAP browser