Welcome USER MANUAL PG-1910 Thank you for choosing Pantech PG-1910 and welcome to the wireless mobile communications with the PG-1910, our dual-band GSM mobile phone. Pantech is delighted to introduce this brand new portable phone which will always keep you connected to the network. This user manual explains in detail its unique features and how to use them. ※ Some of the contents in this User Manual could vary from your phone.
Specification z Weight: 80 g z Dimensions: 103 mm x 43.5 mm x 13.7 mm 1. Display 5. Power Management (Performance) Single Candy-bar 65,536 STN LCD. z 1.5” LCD z Supports up to 65,536 colours within 128 x 128 pixels z 7 lines for text in basic mode with 16-pixel font z Two Soft keys([ z List and grid menu Battery Type Standard (Li-ion) Capacity 720 mAh Standby Time 160 Hours Talk Time 2.5 Hours - 6. Operating Frequency Left], [ Right]), and 5-way joystick .
Views Wrist strap hole Camera key Soft#1(Menu) Soft#2(Contact) MicroSD Numeric 1 3
Quick & Easy Keys Functions Performs the functions shown at the bottom line of the display(Soft Keys). Scrolls through the menu options in Menu mode. In standby mode, the default functions, Push to Left: FM Radio Right: Message menu Up: Ring Tone Down: Contacts For details, see “Using the Shortcut Key in Standby Mode”.
Safety Precautions Boarding an Aircraft - Please turn your phone off when you are on the aircraft. The electronic Using a phone while driving is prohibited. wave from your phone may affect the electronic navigation device in the Please check local laws and regulations with regard to the prohibition of aircraft. phone usage while driving, and comply with them. - Use of your mobile phone while you are driving may disturb your Using Medical Equipment concentration and consequently cause accidents.
Access Code The PUK (Personal Unblocking Key) code is required to unblock and change a disabled PIN code. The PUK2 code is required to unblock and The following section describes various security codes. change a disabled PIN2 code. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your phone for the codes. PIN code (4 to 8 digits) You can change the following codes: lock code(6. Settings>6.
Menu Tree 1.7.2.6 Message Lifetime 1.7.3 Broadcast 1 Messages 1.7.3.1 Languages 1.1 1.7.3.2 Topic List Write New 1.1.1 Text Msgs. 1.7.3.3 Receive 1.1.2 Multimedia Msgs. 1.7.4 Email 1.1.3 Email 1.7.4.1 Max Message Download Size 1.2 Inbox 1.7.4.2 Save Message 1.3 Outbox 1.7.4.3 Email Accounts 1.4 Draft Box 1.7.4.4 Email Bearers 1.5 Sent Box 1.7.4.5 Saving Memory 1.6 Templates 1.7 Settings 1.7.5 Voice Mail 1.8 Memory Info 1.7.1 Text Msgs. 1.7.1.1 Message Center 2 Contacts 1.7.
2.7 Delete All 3.6.3 Delete Logs 2.7.1 Phone 3.6.4 Max Cost 2.7.2 SIM Card 3.6.5 Cost Unit 2.8 Memory Info 2.9 Service Number∗ 3.7 GPRS Info 3.7.1 Current Info 3.7.2 Last Info 3 Call Logs 3.7.3 All Info 3.1 Missed Calls 3.7.4 Delete Logs 3.2 Received Calls 3.3 Dialled Calls 3.4 Delete Call Logs 4.1 External Memory 3.4.1 Missed Calls 4.2 Photo Gallery 3.4.2 Received Calls 4.3 Video Gallery 3.4.3 Dialled Calls 4.4 Image Gallery 3.4.4 All Calls 4.5 Sound Gallery 4.
5.2.2 Music Album 6.3.1 Call Forward∗∗ 5.2.3 File Manager 6.3.1.1 All Calls 5.2.4 Setting 6.3.1.2 When Busy 5.3 Radio 6.3.1.3 On No Answer 5.4 Java 6.3.1.4 When Not Found 5.4.1 Games 6.3.1.5 Cancel All 5.4.2 Connection 6.3.2 Answer Type 5.4.3 Memory Info 6.3.3 Auto Answer 6.3.3.1 Auto Answer 6 Settings 6.3.3.2 Recorded Message 6.1 6.3.3.3 Response Message Display Settings 6.1.1 Main Screen 6.3.3.4 Response Time 6.1.1.1 Wallpaper 6.3.3.5 User Message 6.1.1.2 Wallpaper Type 6.3.
6.4.4 Auto Keypad Lock 6.5 6.6.10 System Reset 6.7 Network Settings Software Version 6.5.1 Search now 7 6.5.2 Default setup 6.6 Organizer 7.1 Alarm 7.2 Calendar 6.6.2 Change PIN* 7.3 Memo 6.6.3 Phone Lock 7.4 Voice Memo 6.6.4 Change Password 7.5 World Time 6.6.5 Phone Barring 7.6 Calculator 6.6.5.1 Incoming 7.7 Converter 6.6.5.2 Outgoing 7.8 Stopwatch Security Settings 6.6.1 PIN Check ∗ 6.6.6 N/W Barring** 6.6.6.1 Outgoing Calls 8 WAP 6.6.6.2 International Calls 8.
8.
Table of Contents 2.6 Speed-dialling from Entry 2.7 Making an Emergency Call Ⅰ. Getting Started 3. Answering a Call 1 Package Contents 3.1 Answering a Call 2 Displays 3.2 Viewing Missed Calls 3 SIM Card 3.3 Rejecting a Call 4 Using the battery 3.4 Adjusting the Calling Volume 3.5 Speaker Phone II. New Functions 4. Calling Options 1. OTA Settings Service 4.1 Switching the Microphone off (Mute) 2. DRM/ Forward Lock 4.2 Holding a Call 4.3 Answering a Second Call III. Basic Functions 4.
6.2 Using the Shortcut key in Standby Mode 2.4 Group Setting 2.5 Memory in Use 7. Entering Text 2.6 Copy All 7.1 Input Mode 2.7 Delete All 7.2 Changing Text Input Mode 2.8 Memory Info 7.3 Using T9 Mode 2.9 Service Number 7.4 Using ABC Mode 7.5 Using 123 Mode 7.6 Using Symbol Mode 3. Call Logs 3.1 Missed Calls 3.2 Received Calls IV. Applications 3.3 Dialled Calls 3.4 Delete Call Logs 1. Messages 3.5 Call Timer 1.1 Write New 3.6 Call Cost 1.2 Inbox 3.7 GPRS Info 1.3 Outbox 1.4.
5.2 MP3 1.2 Entering Text in the WAP Browser 5.3 Radio 1.3 Home 5.4 Java 1.4 Resume 1.5 Bookmarks 6. Settings 1.6 Push Messages 6.1 Display Settings 1.7 Go to URL 6.2 Sound Settings 1.8 Profiles 6.3 Call Settings 1.9 Cache 6.4 Phone Settings 1.10 Security Cert 6.5 Network Settings 1.11 Version 6.6 Security Settings 6.7 Reset 2. SIM Toolkit 7.Organizer Appendix 7.1 Alarm Check List 7.2 Calendar Performance and safety 7.3 Memo Glossary 7.4 Voice Memo Warranty 7.
Ⅰ. Getting Started 1. Package Contents Ⅰ. Getting Started 1. Package Contents 2. Displays 3. SIM Card 4. Using the battery Phone Travel Charger Battery User’s Manual ※ The contents can be vary by regions.
will look like . ( 용 If the inbox list and SIM memory are full, the icon will 2. Displays This phone has 1 display, and icons on the top of the display look like .(공용아이콘) (멕시코향에만 이 아이콘적용) Out of the home network range. indicate the phone status. When a GPRS session is in progress, the icon will look like Icons Area Text and Graphic Area In standby screen, displays textural and graphical information showing Network Name, Time & Date, or a Greeting put by the user .
the display goes into Off Mode to save power. Press any key to restore In some functions, you may be prompted for a password or PIN input. the display. Enter the required code and press in on joystick. [OK] key. Selecting Functions and Options. The phone provides several customized functions, which are arranged in menus and sub-menus. You can access these functions using the two Left], [ Soft keys ([ Right]) and push in on joystick.
3. SIM Card 3.1 SIM Card When you subscribe to your network operator, you will get a SIM (Subscriber Identity Module) card containing your registration information. (PIN), the existence of additional service, etc. Like a credit card, it should be kept securely and handled carefully. Do not bend, scratch or expose it to moisture. 3. If you want to remove the SIM card, push the SIM card in the arrow Avoid static electricity. direction as shown in the picture.
4. Using the battery 4.3 Charging the battery 4.1 Installing the battery (그림 수정필요) z This phone uses a Li-ion battery. Make sure to use an authorised battery and charger only. For more details, please inquire at your nearest dealer. Insert the locators of the battery into the hole located in the upper of the unit and press the bottom of the battery. z You can use the phone during battery recharging. Push the battery until the sound of a ‘click’ is heard.
complete. Leaving the battery in hot or cold places, especially inside a Tip car in summer or winter, may reduce the capacity and life of the battery. Your phone is powered by a Lithium Ion (Li-ion) battery. Always keep the battery within normal temperatures. You can use the following Li-ion battery types for your phone. (Contact - Do not earth the battery. Earthing may occur when the battery is in your local dealer for more information.) contact with a conductive object.
II. New Functions 1. OTA Settings Service 1.1 WAP/ OTA Provisioning 1. OTA Settings Service In order to use the WAP Browser, you need to have proper connection 2. DRM/ Forward Lock settings on your phone. You may add or edit the WAP Profile manually, or receive its settings information sent as a type of configuration message by a operator and/or a service provider. at the latter case, those wap setting information received unsolicitly should be automatically stored on the phone.
III. Basic Functions 1 Switching the Phone On or Off 1. Switching the Phone On or Off 1.1 Switching the Phone On 2. Making a Call 3. Answering a Call 1. Press the [ 2. If the phone requests you to input a PIN, enter the PIN and ] key until the phone switches on. 4. Calling Options push in on joystick. [OK] key. (For further details, see 5. Using the Headset Applications Menu 6.6) 6 Selecting Menu Functions Your phone starts to search for an available network and the current date 7.
2. Making a Call The phone stores up to 30 dialled, received or missed calls chronologically. The last call is saved in the first position. If the same number was dialled more than once, only the latest occurrence will be 2.1 Making a Call saved. Enter the area code and the phone number to make a call in standby ① mode, and press the [ ] key. Press the key to see the call log list aligned dialled, chronologically. ② Push Up/Down the joystick Press the [Up/Down] key to select a number.
③ Press the [ ] key for dialling. (For further details, see Enter 'Emergency Number'. Then press the [ ] key, or, press the [SOS] Soft key if no SIM Card is available. Applications Menu 2) Also, it is available to make an emergency call by [9] key pressed and held. 2.5 Making an International Call ① Press and hold the [0] key for the international prefix until the ‘+’ character appears on the display for the international prefix or enter the outgoing national code following after 00.
3. Answering a Call the joystick pressing the [Up/Down] keys. ③ 3.1 Answering a Call Press the [ ] key to call the missed call. When you receive a call, the phone rings (or vibrates) and the screen will display the name or the number of the caller (if the network supports the Press the [ function and you have subscribed to it).
You can deactivate the speaker phone mode by selecting other is on hold and you can switch between the calls. “Speaker Off” from the Options menu. To place a call on hold simply select ‘Hold’ followed by Options, or press * If the headset is in used, it is be used instead of the Speaker Phone the [ ] key. To place a call on hold simply select ‘Hold’ followed by Options, or NOTE: 1. Please use headset and speaker phone Carkit for your safe when driving. 2.
your network service provider supports this service and you have activated the [Call waiting] option (For further details, see Applications ③ Push in on joystick [OK] key. Menu 6.3.4). You will be notified of an incoming call by a call waiting ④ The Entries are displayed. tone. ⑤ Enter the first letters of the name for Name Search. ⑥ The Contact entries are displayed starting with the first entry To answer a call while you have another call in progress: matching your input.
④ Push in on joystick. [OK] key. [Transfer] option and push in on joystick. [OK] key. ⑤ To add a new person to the multi-party call, call the person in the The two people will be connected to each other. normal way. ⑥ Then, press the [Options] Soft key and select the [Join All] option. 4.8 Using the Message Service ⑦ Push in on joystick. [OK] key. You can read or write a new message during a call. ① Press the [Options] Soft key.
Push in on joystick. [OK] key. ② Push Up/Down the joystick Press the [Up/Down] key to highlight a 5. Using the Headset participant and push in on joystick. [OK] key. ③ Now you can talk privately with that person. The other participants can continue the conversation with each other ④ To return to the multi-party call, press the [Options] Soft key and You can send or receive a call without touching the phone, using the headset. select the [Join All] option. ⑤ Push in on joystick. [OK] [Select] Soft key.
6. Selecting Menu Functions 6.2 Using the Shortcut Key in Standby Mode 6.1 Entering into Menu Functions Key Key Soft [ Soft key Function Goes to the main menu in standby mode. Left] key [ Right] [push left/right joystick] key [push up/down joystick] key [push in on joystick] key Side up/down key Goes to the Searching View Names Moves within the main menu.
[9] Key [*] Key [#] Key Camera Key Photo capture mode Emergency Call Enters or exits form Ettiquette Mode Locks the keypad phone Video recording mode 123 mode You can input numbers in this mode. Symbol mode 7. Entering Text (그림 변경 필요) You can input the special characters, such as a period mark or currency units in this mode. 7.1 Input Mode On many occasions you need to input text while you are using your phone, (e.g., storing a name in the Ph.
the joystick press the navigation [Left/Right] key. And also, to move 7.2 Changing Text Input Mode the cursor to the up or down among the lines, push the joystick up or When you are in the area where you can input the text, the text input down press the navigation [Up/Down] key. mode indicator will be displayed at the bottom of the display. Note: By pressing the [Side Up/Down] key, the cursor can be moved very quickly to the beginning or the end of the text. Example: Entering a memo.
7.3 Using T9 Mode When typing in ABC(Multi-tap) mode, press the key labelled with the target letter: - Press the key once for the first letter. - Press twice for the second letter. Example: To display the letter “C”, quickly press the [2] key three times. To display the letter “K”, press the [5] key twice. This method is called In the T9 alphabet Editor, each word is composed completely as you Multi-tap typing. input the text. ① Press the keys numbered [2] to [9] to input text.
1 2 3 4 5 6 7 8 9 0 [Spanish] KEY 1 2 3 4 5 6 7 8 9 0 . , - ? ! ' @: 1 a b c 2 d e f 3 g h i 4 j k l 5 m n o 6 p q r s 7 t u v 8 w x y z 9 Space 0 4 5 6 7 8 9 0 g h i í 4 j k l 5 m n o õ ó ô ñ 6 p q r s 7 t u v ú ü 8 w x y z 9 Space 0 7.5 Using 123 Mode Characters in displayed order . , - ¿ ? ¡ ! @1 a b c á 2 d e f é3 g h i í 4 j k l 5 mn o ó ñ 6 p q r s 7 t u v ú ü 8 w x y z 9 Space 0 The number mode allows you to enter numbers into the text. Press the key corresponding to the digit you want to enter.
navigation [Up/Down] key. To input a symbol, press the number for a symbol, and the text will appear in the input screen. Press the Soft key [ Right] to proceed to a mode next to the Symbol mode.
Ⅲ. Applications 1. Messages 2. Contacts 3. Call Logs 4. Media Gallery 5. Multimedia 6. Settings 7.
1. Messages provider. Only the phone that supports the multimedia message feature can receive or display the multimedia message. Select ‘Menu>1.Messages’. When viewing a MMS message, if it has an unsupported format, then the unsupported format's icon is displayed such as "Not This menu allows you to create, send, read and save a message using Short Message Service (SMS: Text message), Cell Broadcast support image icon( )" or "Not Support Sound icon( )".
and a notification showing the caller number or phonebook name will any new message. You must delete one or more old messages to free appear on the display. You will also hear an alert, depending on the memory for new messages, using the [Delete] option within the each message sound setting. (For further details, see Applications Menu 6.2) mailbox or the [Delete All] option which deletes the All list. To read the new message(s) immediately, press the [Read] Soft key or - push in on joystick.
joystick to send the message out. You can save 30 messages to phone memory (include default template). - Settings: Sets up the messages environment. If the phone number entry is empty, input the recipient’s phone - Memory Info: Displays the free space of the SIM or phone memory. numbers. You can also search for a number in Ph. Book or Recent Call List by pressing the [Options]. 1.1 Write New 1.1.1 Recent Call List : search for a number in recent call list Text Msgs.
You can set ‘Image at Top’ or ‘Text at Top’. select the sound when the sound list appears. (For further details, see Application Menu 4.4) (3) Sending and saving a message ⑤ Add Photo : Adds a photo to Photo Album. Push in on joystick to When you finish creating the message, push in on joystick. select the phone when the photo list in each folder appears. (For If the phone number entry is empty, input the recipient’s number or further details, see Applications Menu 4.1) email address.
현재 입력한 Email을 Draft box에 저장한다. Add Attachment Photo/Image/Sound의 Gallery에서 데이터를 첨부할 수있다. 첨부 화일은 최대 두개까지 가능하다. - Image Gallery Adds an image to the Image Gallery. Press the [OK] ♦ Sending and saving a message To send Email Msg. 1. Email작성이 완료되었을 때 OK키를 누르면 Recipient 화면이 나온다. key to select the image when the image list appears. 여기서 수신자의 이메일 주소를 입력하면 된다. (For further details, see Application Menu 4.4) 입력이 완료되었을 때 OK키를 누르면 전송바가 화면에 나타난다. - Add Photo 전송이 실패하면 Outbox에 저장이 되어진다. 나중에 재전송할 수 있다.
Select [Options] Soft key [ According to message type, the list of messages displays following icons. Left] on the bottom of the message view to select one of the following options. unread Text message in SIM Cut Number : Extract a number from the message text . You can save it as a Ph.Book Entry. read Text message in SIM unread Text message in phone read Text message in phone Cut Urls: Extract a Url address from the message text. You can save it in WAP bookmark.
The message to be saved before sending will be saved in the Draft Box. Select a text template menu and press the [Options] Soft key [ Press the [Options] Soft key [ Left] at the left of Total Message List to select the following menu. Delete: Deletes the message. Delete All: Deletes all messages in the Draft Box. Edit: edit Draft message. 1.5 Sent Box Create New: Makes a new template. Not available if the template space is full. Left] at the left for associated options.
Internet. The network will convert the messages into the Delivery Reports : When this option is set to [On], the selected format network informs you whether or not your message has been Save to: Allows you to set the text message storage to SIM delivered successfully. or phone. Read Reports : When this option is set to [On], the recipient’s Save message : If set as on, the messages sent will be phone sends a reply to let you know when your message was read by her/him.
1.7.4 Email ♦ Account Name : 새로 만든 계정 이름을 편집 Select ‘Menu>1. Message>7.Settings>4.Email’ and push in on joystick. ♦ Save As default : 여러 개의 계정이 있을 때 You can set up default Email information using this menu with the Defalut로 사용할 계정을 설정 following options. ♦Delete Account : 추가한 계정을 삭제한다. ♦Add New Pop : 계정을 새로 추가한다. Max Message download Size : 이메일 수신시 최대 수신할 수 있는 이메일 사이즈를 선택할 수 있다. [30,.
1.8 Memory Info Select ‘Menu>1.Messages>8.Memory Info’. Select Memory Info and push in on joystick to display the free Text message and Multimedia message memory space.
2. Contacts 2.2 Adding a New Contact Select ‘Menu>2. Contacts >2.Add Contact’. You can store your personal Entries, which can be added or deleted at Adds the Contact information of other people. Initially, an empty field with any time. You can save up to 800 Entries on the phone memory.Entries a grey colour will appear until you input a text. that can be stored on SIM differ with SIM’s storage capacity.
Dial list. You can also add your preferred new groups by pressing the [New] key, 4. If you want to remove or edit particular item in the speed dial list, move on top of the predefined 5 groups. cursor to the item and press the Soft key [ ] to; 2.5 Memory in use Remove: Remove an item. Select ‘Menu>2. Contacts >5. Memory in Use’. Edit : Update another item Allows you to set the storage to Phone or SIM., SIM Card, Phone, 2.3.2 To Set the Speed Dial in Search Select ‘Menu>2. Contacts >1.
This feature may not be available depending on your SIM card. The list of the numbers in the SDN (Service Dial Number) will be displayed. If necessary, scroll to a number by pressing the [Up] or [Down key] and press the [ ] key to dial the number.
3. Call Logs the phone, this option will be shown. Saves the selected Number to the SIM or the phone. Press the [ ] key to see the recent calls in standby mode or select ‘Menu>3.Call Logs’. Delete : Deletes the selected Number. Delete All: Deletes all missed call records from the list. Send Message: Sends a message to the person you missed the call. This function displays missed calls, received calls, and dialled calls.
When the number of the caller is not found in Contacts, the [Save It deletes the missed, received, or dialled calls or deletes all the call Number] option will be created. records with ‘All Calls’. Press the [Yes] Soft key [ 3.3 Dialled Calls Left] or [No] Soft key [ Right] to execute or cancel this function. Select ‘Menu>3.Call Logs>3.Dialled Calls’ 3.5 Call Timer Displays the Dialled calls list accompanied by the time and date of a dialled call as well as the number or name of the recipient.
unit in the service area. - Read Limit: Reads the maximum unit value. - Set Limit: Sets up the maximum units. - Cost Unit: Reads or sets up the unit defined in a service area. This function has the following sub options. This function has the following sub options. - Read Unit: Reads the cost unit. - Set Unit: Sets up the current cost unit and the cost per unit 3.7 GPRS Info Select ‘Menu>3.Call Logs>7.GPRS Info’. This displays the GPRS data transmission capacity.
see Applications Menu 5.1.3 4.3 Video Gallery 4. Media Gallery see Applications Menu 5.1.4 4.1 External Memory 4.4 Image Gallery Allows you to search the files of the MicroSD card, to move to other You can view or edit the image or information recorded in your phone in directories or enable certain basic functions. this menu. The image formats supported here are “JPEG, GIF, BMP, WBMP, 1. Select ‘Menu>4.Media Gallery>1.External Memory’ PNG” JPG은 640*480, 그 외의 format은 256*256 까지 view가 가능합니다. 2.
Rename - Options: Set as Ring Tone(can not used in AMR file), Send as Renames an Image Multimedia Msgs, Rename, Delete, Delete All, Details (for further details about rename a file, see Basic Functions Sets the selected sound as a preferred Ringtone Menu 7) Set as Ringtone (For further details about Options, see Applications Menu 4.
5 Multimedia Press [ 5.1 Camera ] key to return to the camera preview screen. In Multi Capture mode, select [Mark]/[Unmark] to check the image that you want to save. You can take a photo in various ways using the built-in camera. The photo can be saved and sent with a multimedia message.. 4. push in on joystick [ ] to save the photo taken. You can select a photo album and edit the photo name. In Multi Capture mode, the photo will be named automatically. You can 5.1.
Self Timer: select one of None, 5 Secs or 10 Secs. When the selected time has lapsed, a photo is taken. Multi shot : select multishot number you want. 4/6/9 3. If you Push in on joystick [[[ Note: this option will appear in ‘Multi Capture’ mode video.
Allows you to view or edit the photos saved in your phone. 5.1.3.2 Using the Photo Options 5.1.3.1 Views the Saved Picture. 1.Select the ‘Menu->5.Multimedia->1.Camera->3.Photo Gallery’ or Press the [Options] Soft key [ ‘Menu->4.Media Gallery->2.Photo Gallery’ in the menu in this order to to a selected photo from the album. access the Photo Album List. Left] to apply the following options Set as: 1. Wallpaper – Adds a photo to ‘Wallpaper’ in ‘Display Settings’. The 2.
the video list in the album. Select the [Small] or [List] Soft key to change the list type 5.1.4 Video Gallery 4. Select a video and push in on joystick [OK] to play the video image Views or edits the video image saved in your. automatically... Use [ ]/[ ] to pause or play a video image. Turn back to the list if video image ended. 5.1.4.1 Views the Saved Video Right] to pause the play and go Use the [stop] Soft key [ 1.Select ‘Menu->5.Multimedia->1.Camera->4.Video Gallery’ or ‘Menu - back to the list.
Select Changes the default camera option value. - Image Size: Size of the image to be shot ‘Menu>5.Multimedia>2.MP3 Player>1.Player’ in the menu in sequence. LCD (128X128), QVGA (320X240), VGA (640X480). - Shutter Sound: Shutter/Cheese/Smile/321/ Whisky/Off - Self Timer: select one of None, 5 Secs or 10 Secs. When the - Press the [Option] Soft key [ ] to: Play All: Shows the music list in the MicroSD card.
3. 4. : Replays one music repetitively. Information: Shows information. : Replays all the music in order and unlimitedly. Setting [5.2.4] Music Album [5.2.2] Select ‘Menu>5.Multimedia>2.MP3 Player>4.Setting’ in the Select ‘Menu>5.Multimedia>2.MP3 Player>2. Music Album’ in menu in sequence. the menu in sequence. - Mode: Sets playing method. Normal/Pop/Jazz/Classic/ Rock Allows you to make a music list.
The Menu has an option to control the game. displays volume. 3. [Option] Allows you to move to PopList with soft keys. 4. [Ok] Allows you to move to the Save Channel menu with soft keys. 5.4.2 Java Game Execution/Deletion/Information Search 5. [Set] Allows you to move to the Set Frequency menu with soft keys Select ‘Menu>5. Multimedia>4.Java’ in the menu to select a Java menu. Select ‘1. Games’ to view the Java Game list stored in your phone. 5.3.
6.1 Display Settings elect ‘Menu>5. Multimedia>3.Java‘in the menu to select a Java menu. Select ‘2. Connection’ to view the parameter screen. Select ‘Menu>6.Settings>1.Display Settings’. Select a parameter item and press the [OK] key for setup. You can change the outlook of internal LCD display. - DNS1: Inputs the IP address of the Domain Name Server1. A comma will be added every 3 digits. - DNS2: Inputs the IP address of the Domain Name Server2. A 6.1.
Sound, MP3 Sound, Bell Sound and User Sound and each Group has multiple tones. User Sound presents the melody of ‘Menu>4.Media Gallery>4.Sound Gallery’ as a consequence 6.1.3 Backlight Select ‘Menu>6.Settings>1.Display Settings>4.Backlight’. (For further details about User Sound, see Applications Menu 4.4). You can adjust the LCD backlight duration to one of 5 Secs/10 Secs/20 Secs/1 Min/10 Mins.
- Tone Type: You can turn the key tone on or off. - Sound: Selects a key tone. 6.3.2 Answer Type 6.2.5 Sound Effect Select ‘Menu>6. Settings>2. Sound Settings >5.Sound Effect’ Select ‘Menu>6.Settings>3.Call Settings>2.Answer Type’. Turns the default sound effect on or off. You can set up the call receiving method. Press the [Mark] Soft key, and then press the push in on joystick [OK] Use the joystick by push it left or right [Left/Right] key to set the call key to save. receiving method.
- Recorded Message: Displays a list of recorded messages - On: Sets up Auto Redial. during call active (In call). Each list displays the recorded - Off: Cancels Auto Redial. date & time of the file and the message caller ID as well. Press the [Delete] Soft key to delete the message in the View list, and press the [Send] key to make a call while - - 6.3.5 Call Waiting confirming recorded messages. Select ‘Menu>6.Settings>3.Call Settings>5.Call Waiting’.
The number for Own Number can vary depending on the SIM. Press the [Options] Soft key [ Left] to: 6.4.3 Favorites Select ‘Menu>6.Settings>3.Phone Settings>3.Favorites. Add: Adds a Own Number. Delete: Deletes a Own Number. The Favorites menu is, so called, the collection of items frequently Edit: Edits a Own Number. used, and can be made up by your own sake. To add an item to the Favorites, browse to the item which you want and press the 6.4 Phone Settings [Favorite] Soft key [ 6.4.
Secs/1 Min/2 Mins. the Call Barring service and Fixed Dialling mode. Push Up/Down the joystick Press the [Up/Down] key to select the value that you want and push in on the joystick. press the [OK] key. Notice: If you want to get out of the Keypad locked screen, you should 6.6.1 PIN Check press Soft2 key [Unlock] and then [#] key. And, in the keypad locked screen, you can only use the Soft2 [Unlock] key to turn on the LCD Push the joystick left or right Press the navigation [Left/Right] key backlight.
- Delete All: Cancels all the barring settings. - Change Password: Replaces the old password with a new one. 6.6.4 Change Password Changes a password. Default Password is 1234. 6.6.7 CUG (Closed User Group) 6.6.5 Call Barring This function offers multiple methods to limit incoming or outgoing calls. In general, the barring service becomes activated by interoperating with the network, but Phone barring is made by the phone itself.
Dialling list. 6.6.9 Change PIN2 7.1 Alarm Select ‘Menu>7.Organizer>1.Alarm’. You can set up to 5 alarms (Once you set the On Morning Call, then Changes PIN2. 6.6.10 System Reset Select ‘Menu>6.Settings>7.System Reset’ an icon appears on the display) 7.1.1 To set an alarm Select ‘Menu>7.Organizer>1.Alarm’ to display the current alarm list. Deletes all user settings and data from your phone and returns to factory default settings.
Select ‘Menu>7.Organizer>2. Calendar’ from the menu to display the Monthly View. Press the [AM]/[PM] key Soft key [ Left] to select AM or PM Press the [New] Soft key [ time format for setup. Press the [Options] Soft key [ Right] to add a new event. Left] to; Goto Date: Moves to the set date. Goto Today: Moves to today for selection. Select ‘Menu>7.Organizer>2.Calendar’. View All Events: Shows all of your scheduled events The Calendar helps you managing your schedule.
③ Shows the schedule registered for a date. Select a schedule and press After input, push in on joystick, the [OK] soft key to save the event. the [OK] key to view or edit the details of an event. Press the [Options] Soft key [ Note: Maximum Quantity of Schedule for Registration: 50 Maximum Daily Quantity of Schedule for Registration: 5 Period of Registration: 01/01/1950 ~31/12/2043 Left] to; Delete: Deletes an event Delete All: Deletes all events. D-day On/ D-day Off: Sets up or cancels D-Day.
use the Text Editor for a message title. 1. Select an item and push in on joystick, the [OK] soft key to start play (For further details about using editor, Basic Functions Menu 7) immediately. ① Select an item in the voice memo list, and push in on joystick, the [OK] soft key to start play immediately. Record ① Press the [New] Soft key [ Right] to start record ] key or [ ] key to rewind or fast forward to position about 5seconds. immediately.
as Local] from the Options menu and Target Area will be replaced numbers. with Home Area. Push [Down] joystick again to move to the next line and select a result unit and you will get the correct answer. 7.6 Calculator * Tip: The result is automatically recalculated upon a change of unit or value. Select ‘Menu>7.Organizer>6.Calculator’. Your phone has a Calculator function. Calculator provides 4 basic Press the Soft key [ Left] to input a decimal point. operations +, -, x, and /.
V. Advanced Functions 1. WAP 2.
1. WAP appears above the Soft key [ You can access the Internet with a WAP (Wireless Application Protocol) Right]. (For further details, see Basic Functions Menu 7) browser. That means you can connect to the Internet anywhere and anytime 1.3 Home where you have network coverage. The descriptions below can vary according to your Network provider. This menu contacts the network to load the Wireless Web service Therefore, ask your Network provider for detailed information. provider homepage.
Note: this feature will not be available if the manufacturer provides a default bookmark.. Delete: Deletes a bookmark from the List. 1.7 Go to URL Note: this feature will not be available if the manufacturer provides a default bookmark. This menu leads you to an URL that you have visited before. Go: Goes to the related site 1.8 Profiles (Note: The parameter settings are already entered as required by the 1.6 Push Messages service provider.
Password. For each submenu, pressing the OK button lets you enter edit mode to edit every item provided by the service provider. - Bearer: This lets you select the bearer type for each type of - Data Call Type: Use the left or right navigation key to select from network access. Using the left or right navigation key allows you the two modes: ISDN and Analogue. to select from the two modes: GSM Only and GPRS Only.
1.11 Version This function is for viewing the software version of the WAP browser 2. SIM ToolKit Refer to the service provider.
VI.
1. Check List undergrounds where the signal strength is poor, move toward a window or go out open area. If you still cannot make a connection, If you experience any problem while using your mobile phone, please refer contact the nearest service centre. to the following checklist. If the problem still persists, contact your dealer or nearest service centre. When audio quality is poor: End a call and try again. When the “Insert SIM Card” message appears: Make sure the SIM card is correctly installed.
2. Performance and safety When you are unable to charge the battery: This may be the result of one of the following cases. The following list shows how to maintain your mobile phone, together with 1. Your charger may be out of order. Contact your nearest dealer. precautions to take. 2. You may be attempting to use the phone in an overly hot/cold - Keep your mobile phone and its accessories out of the reach of children. temperature. Try changing the charging environment.
3.Glossary connection to the Internet for mobile phone and computer users. It is based To help you understand the main technical terms and abbreviations used in on the Global System for Mobile Communication (GSM) circuit-switched this booklet and take full advantage of the features of your mobile phone, mobile phone connections and the Short Message Service (SMS). here are a few definitions.
SIM (Subscriber Identification Module) when you are not available, plays a greeting (optionally in your own voice) Card containing a chip with all the information required to operate the and records a message. phone (network and memory information, as well as the subscriber’s personal data). The SIM card fits into a small slot on the back of the phone and is protected by the battery.
RF exposure FCC ***This device contains 1800 MHz GSM functions that are not operational For body worn operation, to maintain compliance with FCC RF exposure guidelines, in U.S. Territories; this filing is applicable only for 850 MHz GSM and 1900 use only accessories that contain no metallic components and provide a separation MHz PCS operations. distance of 5mm (0.2 inches) to the body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided.
