User Manual
68
Call Divert [6.3.1]
Select ‘Menu>6.Settings>3.Call Settings>1.Call Divert’.
You can divert a receiving call to another phone number with this menu.
You may choose one from All Calls, When Busy, On No Answer, When
not Found, or Cancel All, all of which divert as required.
Answer Type [6.3.2]
Select ‘Menu>6.Settings>3.Call Settings>2.Answer Type’.
You can set up the call receiving method.
Use the [Left/Right] key to set the call receiving method. Press the [OK]
key to save.
- SEND key: You can answer the incoming call by pressing the
[
] key.
- Any Key: You can answer incoming calls by pressing any key,
except the [
] key and the [Reject] Soft key.
- Flip Open: You can answer an incoming call by opening the
phone flip.
- Auto Receive: Your phone automatically answers calls after 10
seconds. This feature is available only when the phone is
connected to the headset jack.
Auto Answer [6.3.3]
The Auto Answer function works like an automatic answering machine. It
relays the recorded message to the caller if you do not answer the call
for a specified period of time.
- Auto Answer : Set Auto Answer to [On/Off]. If set to [On], the
Auto Answer function will be enabled.
- Recorded Message: Displays a list of recorded messages
during call active (In call). Each list displays the recorded date &
time of the file and the message caller ID as well. Press the
[Delete] Soft key to delete the message in the View list, and
press the [Send] key to make a call while confirming recorded
messages.
- Response Message: Depending on your current situation, a
different answering message will be played, including.
[Absent/Meeting/Driving/User Message]. The User Message is
the voice message of the local user that will be answered in the
standby mode.
- Response Time: Sets the automatic answering time (After 3
Secs/5 Secs/10 Secs/20 Secs). When the response time elapses
without answering the incoming call, the recorded message will
be relayed to the caller. If the caller decides to leave a voice
message, recording will be started with a beep sound.
- User Message: Displays your voice message set for the
response message. Press the [
] key for playback.