User Manual

44
Text Msg [1.7.1]
You can set up default SMS information using this menu with the
following options.
- Message Centre: Allows you to store or change the number of
your SMS centre required when sending a message. You must
obtain this number from your service provider.
Message Lifetime: Allows you to set the duration of time your
- message is stored at the message centre while attempting to
deliver it.
- Message Type: Allows you to set the message type to Normal,
Fax, Voicemail, ERMES, Nation’ l Paging, X.400, or Internet.
The network will convert the messages into the selected format.
- Receive to: When a text message is received, it allows you to
select the place where the message can be saved. If the storage
capacity of the selected place is full, the message will be saved
in other place. Press the [Left/Right] key to choose either
Phone or SIM.
- Save Message: Determines whether or not the message sent
successfully will be stored in the ‘sent box.’ Press the
[Left/Right] key to choose either On or Off.
- Delivery Report
송신한 메시지가 상대방에게 전달되었는지의 여부를 확인하기
위한 기능입니다
Multimedia Msg. [1.7.2]
MMS Profile [1.7.2.1]
- Profile Name: Input the profile name.
- Home URL: Input the connection URL.
- Connection Type: Select WAP or HTTP.
-
GSM Settings
- Gateway
- IP Address: Input the IP address. A point will be added after
every 3 digits. A comma will be added every 3 digits.
- IP Port: Input the IP port number yourself.
- Login ID: Input the ID to sign into the gateway.
- Password: Input the password to sign into the gateway.
- Data Call Type
: Press the [Left/Right] key to choose either ISDN
or Analogue.
- Dial Number
: Input the dial number manually
- Login ID
: Input the ID to sign into the GSM.
- Password
: Input the password to sign into the GSM.
- GPRS Settings
- Gateway
- IP Address: Input the IP address. A comma will be added
every 3 digits.
- IP Port: Input the IP port number yourself.
- Login ID: Input the ID to sign into the GPRS service
- Password: Input the password to sign into the GPRS service.
- APN
: Input the Access Point Name yourself.
- Login ID
: Input the ID to sign into the GPRS service.
- Password
: Input the password to sign into the GPRS service.