User Manual

19
18
BATTERY HANDLING
INFORMATION
BEFORE USING
H DO’s
H DON’Ts
• Don’t attempt to disassemble the battery – it is a sealed unit
with no serviceable parts.
• Don’t accidentally short circuit the battery by carrying it in
your pocket or purse with other metallic objects such as
coins, clips and pens. This may critically damage the battery.
• Don’t leave the battery in hot or cold temps.
Otherwise, it could significantly reduce the capacity and
lifetime of the battery.
• Don’t dispose of the battery into a fire.
• Only use the battery and charger approved by the manufac
turer.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41ºF (5ºC )
and 95ºF (35ºC).
• If the battery is stored in temperatures above or below the
recommended range, give it time to warm up or cool down
before using.
• Completely drain the battery before recharging.
It may take one to four days to completely drain.
• Store the discharged battery in a cool, dark, and dry place.
• Purchase a new battery when its operating time gradually
decreases after fully charging.
• Properly dispose of the battery according to local laws.
QUICK START
BEFORE USING
When you register with a network operator, you’ll be given
a UIM card, on which you could find user’s registration
information (PIN, with additional services you may have
subscribed to). Similar to a credit card, it should be stored in
a safe location and you should use it with care. Do not bend
or scratch it, and protect it from wetness and static.
To protect the UIM card from damages, you must turn the
phone off before removing or inserting the UIM card.
If necessary, turn off your phone by pressing and holding
the
key until the power-off message appears.
 Check the UIM slot is empty and install the UIM card
into the slot.
 If you wish to remove the UIM card, push it in the arrow
direction shown in the picture below.


PS-300_060602.indd 18-19
PS-300_060602.indd 18-19
2006.6.2 5:36:19 PM
2006.6.2 5:36:19 PM