User's Manual

11
Getting Started
Charging the battery
1. Connect with the charger adapter on the top right side.
Make sure you align the connector as shown in the image.
Correct Incorrect
Note Make sure to align the connector as indicated in the image.
Otherwise, the charging connector will be damaged and the battery
will not be charged.
2. Disconnect the charger from the
phone when the battery is fully
charged.
Installing the microSD™ card
1. Remove the battery cover from the
unit.
2. Insert the microSD™ card into the
slot. Ensure that the gold contacts
of the card go against the metal
contacts of the phone.
3. To remove the memory card, slide the memory card out in
the opposite direction of the arrow.
5. To place the battery cover back
onto the unit, slide the one end of
the cover into the groove, and then
push it down.
Correct method of inserting the battery
Correct Incorrect
Correct method of installing the battery cover
Correct Incorrect