User's Manual

10
Getting Started
Follow the outlined steps that should be taken first before
using P9070.
Inside the package
The package should contain the following items:
x Handset
x Battery
x USB/Wall Charger
x Quick Start Guide
x User Guide
x Warranty Card
x microSD™ card(pre-installed)
SIM/USIM card and battery
About the SIM/USIM card
When you subscribe to the network operator, you receive
the Subscriber Identity Module (SIM) card or the Universal
Subscriber Identity Module (USIM) card that contains your
registration information, PIN code, etc. You should keep it
secure and handle carefully. Do not bend, scratch or expose it
to moisture. Avoid static electricity.
About the battery
The phone uses a Lithium Ion (Li-Ion) battery. Make sure to use
the authorized battery and charger only. Maximum hours to
use the battery might vary depending on service types offered
by the service provider and temperatures. For more details,
inquire at your nearest dealer.
Note The Li-Ion battery can be recharged while some charge
remains without reducing your phone’s autonomy due to the
“battery memory effect” inherent in those technologies.
Installing the SIM/USIM card and battery
1. Remove the battery cover from the
unit.
- To remove the battery cover,
place your finger nail in the
groove at the bottom of the unit,
and then lift it up.
2. Insert the SIM/USIM card into the
slot. Ensure that the gold contacts
of the card go against the metal
contacts of the phone.
3. Slide the connector of the battery
into the notch located at the top of
the unit. Insert and press the lower
side of the battery until you hear a
click. Make sure you align the gold
contacts on the battery end with
the contacts on the phone. If the
contacts on the battery are not
properly aligned, the phone and the
battery could be damaged.
4. To remove the battery, lift the
bottom of the battery up and
remove. To remove the SIM card,
slide the SIM card in the direction of
the arrow as shown.