User Manual

Table Of Contents
2
SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive a SIM
(Subscriber Identity Module) card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and handled carefully. Do not
bend, scratch or expose it to moisture. Avoid static electricity.
To avoid corrupting your SIM card’s memory, always switch off your phone
before removing or inserting your SIM card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized battery
and charger only. For more details, please inquire at your nearest dealer.
NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlike other
forms of battery technology, you can recharge your battery while some
charge remains without reducing your phone’s autonomy due to the “battery
memory effect” inherent in those technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the unit.
2. To fit the battery cover, put it on the
guide rail and push up.
3. Insert the SIM card into the slot. The gold
contacts of the SIM card should go against the
metal contacts of the phone. Put the contacts of
the battery into the hole located at the bottom of the unit insert and
press the upper side of the battery until you hear the “click”.
4. To remove the battery push the bottom of the
battery to upwards (1) and remove (2) the
battery. Push the SIM card in the direction of the arrow as shown.
To charge your battery
1. To charge, open the protective cover on the top
right side and connect the charger adapter.
Make sure you align the connector as the image.
If not, it will damage the charging connector on
the phone and will not charge.
2. To remove the adapter connection press the
adapter’s side buttons(1) and pull the adapter
away(2).
1
1
1
2
1
1
1
1
2
2
2
1