Operation Manual

01
02
03
05
06
07
04
90
91
KEYPAD SOUNDS
To select keypad sounds when using the QWERTY Keypad.
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 4. Keypad Sounds .
2. Select
DTMF , Cloud or Simple , then press the OK Key [ SET ].
DTMF is the default setting for this device.
KEYPAD VOLUME
To set the keypad volume:
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 5. Keypad Volume .
2. Adjust the volume by pressing the Directional Key up or down, then press
the OK Key [
SET ] to save the setting. To test the volume level, press the Left Soft
Key
[ Play ].
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out loud when you enter a
phone number with the QWERTY Keypad.
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 6. Digit Dial Readout .
2. Select
On or O , then press the OK Key [ SET ].
SERVICE ALERTS
To set any of the three Alert options to either On or O:
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 7. Service Alerts .
2. Select one of the following options, then press the OK Key.
• ERI: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the display
screen informing the handset user of which systems the wireless device is using as
compared to the service plan they purchased. The ERI Banner text changes to tell
a customer if they are using the Verizon Wireless Network, Extended Network or
Roaming.
•
Minute Beep: Alerts you every minute during a call.
•
Call Connect: Alerts you when the call is connected.
•
Software Update: Alerts you when a software update is available.
3. Select On or O , then press the OK Key [ SET ].
DEVICE CONNECT
Allows you to turn the Device Connect On or O:
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 8. Device Connect .
2. Select
On or O , then press the OK Key [ SET ].
POWER ON/OFF
To set the phone to sound a tone when the phone is powered on or o:
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 9. Power On/O .
2. Press 1. Power On or 2. Power O .
3. Select
On or O , then press the OK Key [ SET ].
OPEN/CLOSE SOUND
To set the phone to sound a tone when the slider is open or closed:
1. Slide the phone up, press the [ MENU ], then press 9. Settings & Tools ,
5. Sounds Settings , 0. Open/Close Sound .
2. Select
Music , Simple , Beep or O , then press the OK Key [ SET ].
DISPLAY SETTINGS
Allows you to customize the display.
EASY SET  UP
Easy Set-up menu allows you to set nine stages for Display Settings with simple
operation.