Operation Manual

01
03
04
05
06
07
02
28
29
MAKING A CALL
1. Slide the phone up and enter the phone number (include the area code if
needed).
• To erase one digit at a time, press the CLR Key .
• To erase the entire number, press and hold the CLR Key .
• When you place or receive a call from phone numbers stored in your Contact List with
a contact name, the name will be displayed.
2. Press the SEND Key .
3. To end a call, press the END Key
.
• If you activate the AUTO RETRY function, the phone will automatically re-dial the
number (Refer to page 103).
• You can also place calls using Voice-Activated Dialing. Please refer to page 64 for
more details.
ANSWERING CALLS
1. When your phone rings or vibrates, slide the phone up or press the SEND Key
to answer the incoming call. (Depending on your Answer Options , you
may also answer incoming calls by pressing any key.
Any Key is the default
setting for this device.)
2. To ignore incoming calls, press the Right Soft Key
[ Ignore ].
3. To end a call, press the END Key
.
If Answer Options is set to “Auto with Handsfree”, calls are answered automatically
after about ve seconds (Refer to page 102).
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call icon appears on the display.
TO DISPLAY THE MISSED CALL ENTRY FROM THE NOTIFICATION
SCREEN:
1. Highlight View Now and press the OK Key.
2. Press the OK Key [
OPEN ] to view the call details.
TO DISPLAY A MISSED CALL ENTRY FROM IDLE MODE:
1. Slide the phone up, press the OK Key [ MENU ], select 7. Recent Calls , then
press the OK Key.
2. Press
1. Missed .
3. Highlight the entry you wish to view, then press the OK Key [
OPEN ].
4. To dial the phone number, press the SEND Key
.
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail or calling cards). Insert
a pause after a phone number and then enter another group of numbers. The
second set of numbers is dialed automatically after the pause. This feature is
useful for dialing into systems that require a code.
Wait (w)
The phone stops dialing until you press the SEND Key or OK Key to advance to the
next number.
2-Sec Pause (p)
The phone waits 2 seconds before sending the next string of digits automatically.
1. Slide the phone up and enter the phone number.
2. Press the Right Soft Key
[ Options ].
3. Select Add 2-Sec Pause and press the OK Key.
4. Enter additional number(s) (pin number or credit card number).
5. Press the SEND Key
to dial or the Left Soft Key [ Save ] to save.
MAKING AN INTERNATIONAL CALL
1. Slide the phone up, then press and hold the * Key . The + required for
international calls appears.