Operation Manual

21
2
This chapter addresses and explains the basic features for
JEST
TM
including:
BASIC OPERATION
Turning the phone on/o
Accessing the menu
Using the Task Bar
Quick switching between the main
menus
Menu summary
Making a call
Answering calls
Missed Call notication
Wait/Pause feature
Making an international call
3-way calling
Call waiting function
Calling a number from contacts
Adjusting volume
Caller ID function
Vibrate mode
Speakerphone mode
Using auto keypad lock function
Available options during a call
Making an emergency call
Dialing Letters
TURNING THE PHONE ON/OFF
TURNING THE PHONE ON
1. Press and hold the END Key until the display turns on.
• If “ENTER LOCK CODE” appears on the display, press the OK Key to unlock the keypad,
and enter your 4-digit lock code.
• The default lock code is the last 4 digits of your phone number.
TURNING THE PHONE OFF
1. Press the OK Key to unlock the keypad, then press and hold the END Key
until your display turns o.
• Immediately change or recharge the battery when “BATTERY LOW” appears on the
display. Memory may possibly be damaged if the phone turns o due to the battery
completely draining.
• Turn the phone o before removing or replacing the battery. If the phone is on,
unsaved data may be lost.
ACCESSING THE MENU
Your phone can be customized via the menu. Each function can be accessed by pressing
the Directional Key
or by pressing the number that corresponds with the menu
item.
1. To access the main menu from idle mode, slide the phone up and press the OK
Key [
MENU ].
2. To scroll through the menu, press the Directional Key up or down or press
the number that corresponds to the desired menu item.
3. To return to the previous page, press the CLR Key . To exit the current menu
and return to idle mode, press the END Key
.
4. From idle mode, press the OK Key to unlock the keypad, then press the Left Soft
Key [ ] [ Message ] to open the Messages menu or press the Right Soft Key
[
] [ Contacts ] to open your Contact List.