User's Manual

Function Description of Each Component
• POWER LED
Lighted when the external power is applied.
- When the external power is applied, the L E D is red.
- When the internal power is applied, the LED is green.
- If the backup battery is connected, you can use the terminal without
the external power supply.
• S E RVICE LED
Indicates status of the backup battery.
- LED OFF : Indicates that the service is not available as the
receive power intensity is weak.
- LED blinking: Indicates that the service available although the
receive power intensity is weak.
- LED ON : Indicates that the receive power intensity is strong
and the service is available.
• MODE LED
- R E D : Indicates that the state is Voice Ca l l .
- Green : indicates that the state is Data Se r v i c e .
- Yellow : Indicates that the state is FAX Ca l l .
- LED OFF : Indicates that the state is stand by.
Thank you for purchasing this product. Please check if the
components of the product are consistent with the figure below :
Components ch e ck
FWT terminal
Antenna
Power supply (SMPS)
user Guide Fixation Nuts
HWT-2150
User Guide
7
Before Using
6
POWER LED
S ERV ICE LED MODELED
CHGLED
S erial
ANT.
RJ -11
DC J ack Power Button
hWT-2150(8-9) 2003.8.9 11:51 AM 페이지7