User's Manual

HWT-2150
User Guide
3 1
Supplement Service
3 0
IS-707A.7 Analog G3 Fax standard setting.
Enter [##3233 5 Maintenance Code 2 2] and press
the []button to save.
##3233 5 Maintenance Code 2 2
: IS-707A.7 Analog G3 Fax standard setting
D e fault Data Rate Setting
The terminal supports two types of data rates according to the
s t a n d a r d s .
This function is used to set the default rate for data calls.
- Default Data Rate Setting
Setting IS-99 Rate Set 1 : Enter [##3233 5 Maintenance
Code 3], select “1”, and then press the [] button to save.
##3233 5 Maintenance Code 3 1
: Setting default data rate (8K) to RS1 (IS99)
Setting IS-99 Rate Set 2: Enter [##3233 5 Maintenance
Code 3], select “2”, and then press the [] button to save.
##3233 5 Maintenance Code 3 2
: Setting default data rate to RS2 (IS-99 based)
Setting IS-707.4 Rate Set 1 : Enter [##3233 5 Maintenance
Code 3], select “3”, and then press the [] button to save.
##3233 5 Maintenance Code 3 3 →✽
: Setting default data rate to RS1(IS-707.4 based)
Setting IS-707.4 Rate Set 2 : Enter [##3233 5 Maintenance
Code 4], select “4”, and then press the [] button to save.
##3233 5 Maintenance Code 3 4 →✽
: Setting default data rate to RS2(IS-707.4 based)
R i n ger Fre q u e n c y & Cadence Control
This function is used to control the ringer frequency and cadence.
Select the frequency first and then select the cadence. Default
setting is 20Hz, 1 sec On – 2sec Off .
- Ringer Frequency Setting
Enter [##3233 5 Maintenance Code 4]. Select a desired
number from 1 (16Hz) , 2 (20Hz) and 3 (25Hz).
- Ringer Cadence Setting
After selecting the frequency, select the cadence. Select a
desired number from 1~ 6 and press the * button to terminate
ringer frequency and ringer cadence setting.
No. 1: 1Sec On – 2 Sec Off
No. 2: 0.4 Sec On – 0.2 Sec Off - 0.4 Sec On – 2 Sec Off
No. 3: 1 Sec On – 4.5 Sec Off
No. 4: 1 Sec On – 4 Sec Off
hWT-2150(8-9) 2003.8.9 11:51 AM 페이지31