User's Manual

3. As shown in the figure below, insert A1 and A2 of the terminal to the
head of the screw and press the terminal downward to fix it.
W a l l
Screw required to
tighten the terminal
to the wall.
A1 A2
4.The following figure shows the shape after completion of Installation.
HWT-2150
User Guide
1 5
Installation
1 4
※ You can get a batter call quality by installing the external panel antenna
(Please contact the distributor of the product for the antenna).
※ The FWT terminal has a backup battery to run without the external power
s u p p l y. If the SMPS for the FWT terminal is down, the terminal can run for
about 15 hours in waiting state and for about 2 hours in call state with
the backup battery.
I n s t a l l a t i o n f o r d a t a s e r v i c e
As shown in the figure above, connect the serial port of the FWT terminal
to the PC COM1(COM2) with the RS232 cable. Data service subscribers
can purchase the RS232 cable from the service provider.
<FWT-PC connection for data service>
Computer
RS-232 Cable
WLL
Terminal
Telephone
hWT-2150(8-9) 2003.8.9 11:51 AM 페이지15