User's Manual

HWT-2150
User Guide
3 3
Supplement Service
3 2
No. 5: 0.25 Sec On – 0.25 Sec Off - 0.25 Sec On – 1.25 Sec Off
No. 6: 2 Sec On – 4 Sec Off
##3233 → 4 → 3 → 1~3(frequency) → 1~6(cadence) →✽
: Ringer frequency & cadence setting
Dial Tone Fre q u e n c y Control
This function is used to select the dial sent from the handset. Default
setting is 350 + 440Hz dual tone.
- Dial Tone Frequency Control Method
① Enter [##3233 → 5 → Maintenance Code → 5 ] .
Select a desired number from 1 (350+440Hz) , 2 (400Hz) ,
3 (425Hz) and 4 (450Hz) and press the [✽] button.
##3233 → 5 → Maintenance Code → 5 → 1~4 → ✽
: Dial Tone Frequency Control (Method 1)
② Pick up the handset of the normal phone, press [####], and enter
a desired number out of 51 (350+440Hz) , 52(400Hz) , 53(425Hz)
and 54(450Hz).
#### → 51~54 : Dial Tone Frequency Control (Method 2)
D e fault Vocoder Selection
The terminal provides service with three Vocorder types.
This function is used to select the Vocorder type.
- Vocoder Selection Method
Enter [##3233 → 5 → Maintenance Code → 6], select one of “1”
(8K EVRC) or “2” (13K QC E L P ) and then press the [✽] button to
s a v e .
##3233 → 5 → Maintenance Code → 6 → 1 or 2 → ✽
: Vocoder selection
Timed Hot Line Dial Send Waiting Time
C o n t ro l
This function is used to control the hot line number send time when
the Timed Hot Line is On. The Hot Line number send time is
adjustable from 4 sec to 8 sec and default setting is 6 sec.
- Timed Hot Line Dial Send Waiting Time Setting
① Enter [##3233 → 5 → Maintenance Code → 7 ] .
Select a desired number from 4 , 5 , 6 , 7 and 8 and press the [✽]
b u t t o n .
For example, to set 7 sec, press 7 and the [✽] button.
##3233 → 5 → Maintenance Code → 7 → 4~8 →✽
: Timed Hot Line Dial send time setting (Method 1)
hWT-2150(8-9) 2003.8.9 11:51 AM 페이지33