User's Manual

QQYUWDAl
The distance between the screw head and the wall is to be 2.0mm as shown on the fisure above.
Insert the parts
Al, A2 of the wall bracket into the WLL terminal body, and gently push in the
parts
BI, 82.
A1 -A2
BI B2
@ Insert screws into the C1, C2 notches, and pull the body downward. As this takes place, make
sure about the distance between the
screw head and the wall, lest the body hangs askew.
Wallmounting type
Telephone \ -rr
Wall
Screws to tix the
bracket to wall
Wall Bracket
External Antenna
Q Disconnect antenna from the phone