User's Manual

1QQ Y U W D A I
RSSI LED
RSSI LED goes “ON”, when the state of
ma-ceivine is “GOOD”.
Buttons
___
Y
DIAL
Input telephone numbers or numeric characters
(0-9, *, #), and choose menu items.
RSSI LED goes “ON and OFF” at the interval
of 1 second, when the state of trans-ceiving is
‘NOT
GOOD”.
RSSI LED goes “ON and OFF” at the interval
of 15 seconds, when the state of trans-ceiving is
“NO SERVICE. UPmWN
Retrieve stored telephone numbers, adjust beep
volume and ringer loudness when the phone is
ringing, move across menu items, and adjust
handset loudness during the call.
POWER LED
Indicates whether the power is supplied by
external SMPS or by internal battery. The LED
goes“ ON” when external power is supplied.
When the
terminal operates on internal backup
battery, the LED
gd OFF“.
FUNCTION
Input menu
STORE
Store the settings and menu
Hook Switch
Turns call on and off, This switch starts and
endsworldngwithwLLtellninal.
REDL4L
Make a call to the last dialed telephone
numb.
DC Jack
Connects power supply from the SMPS to the
WLLtermina.
RING
Select ring sound from 10 types of ring.
serial Port
A port through which data services (Modem,
PC
Fax, Internet access) are available.
SEND
Make call attempt in the off - hook state.
Power Switch
Turns the power supply to WLL terminal on
and
off
1.4 lnsfalling WLL Terminal (INSTALLING ANTENNA)
General Observations
Connect DC jack as shown below.
Q Connect the SMPS plug to the outlet.