User's Manual
44
Y U
W
D
A
I
4iYUWDh
4.1.6.1
Data
Receiving Mode Setup
Methcd
I~J~~~~
Press [FUNCTION]
to
return
to
the Waiting Mode without making changes.
Method
p~
~usingATc~mmand
You can setup receiving mode you want using AT commands from your computer
connected
to
the WLL terminal.
Enter [AT+HDVAD=O] and press Enter.
This command disables data receiving mode.
.
Enter [AT+HDVAD=l] and then press Enter.
This command enables PC fax receiving mode for one time.
Enter [AT+HDVAD=2] and then press Enter.
This command enables PC fax receiving mode for always.
Enter [AT+HDVAD=3] and press Enter key.
This command enables modem mode for one time.
.
Enter [AT+HDVAD=4] and press Enter.
This command enables modem mode for always.
.
Default is [AT+HDVAD=O].
4.2
To
Ac@f
Wume
4.2.1
To
adjust the handset volume
Mahod
Q
.
Use [UP]I[DOWN] buttons
to
adjust the volume, and press [STORE] to save
the changes you have made.
.
Press [FUNCTION]
to
return
to
the Waiting Mode without making changes.
Method
I~J
-
Use [UPl/[DOWN] button
to
adjust the volume during the
call.