User's Manual

4iYUWDAI
2. Using Basic Functions
2.2 To Receiving an Incoming Call
2.2.1 In on - hook state
2. I Call Process 8 Call Process by Special Funcfion
2.1 .I Call press
. Pick up the handset. You will hear the dial tone. (In the“ No Service” state however, the
. In the No Service” state, you cannot make calls.
. Pick up the handset and press [REDIAL] button. The call will be made to the last dialed
. Dial the telephone number and press [SEND] button to make a call.
. If you do not [SEND] button after dialing the number, the call will be made automatically
6 seconds later.
. Speak on the telephone.
. Place the handset on - hook to terminate the call.
warning tone is heard at the interval of 0.5 second.)
number.
2.1.2 Call process by special function
. You can make a phone call by special fundion.(Special Dial, Emergency Dial, Hot Line Dial)
. If the telephone starts ringing, Pick up the handset.
. Speak on the telephone.
. Place the handset on - hook to terminate the call.
2.2.2 In off
- hook state
. If a call comes when you dial the number, the telephone starts ringing.
. Press [SEND] button to accept the call.
. Speak on the telephone.
. Place the handset on - hook to terminate the call.
% ww*-
ringing singal
the tekphone.
2) ff the nnger comes into actio
3) During a cal1,you canadju
2.3 To Lasf Number Redial (Redial Function)
. You can easily make a call to the last dialed telephone number.
Q Pick up the handset and press [REDIAL] button.
Q When the call is connected, you can speak on the telephone.
Q Place the handset on - hook to terminate the call.