User Guide

SETTINGS

Setting Fingerprint Authentication

After the selecting the location of the registered

fingerprint by using the / Navigation, select

“Set as authentication” via the Pop-up Menu.

You can set only one fingerprint for

authentication.

If you have used the Handset lock shortcut key(#)

on the idle screen to execute the lock function and

the authentication by the fingerprint

authentication is not set, the fingerprint registration screen will

appear. If there is an already registered fingerprint, you can only use

the “Set as authentication” to activate the lock function. If there is

no registered fingerprint, you can directly register the fingerprint to

use. Also, if you don’t want to use the lock function by fingerprint

authentication, press the

key. Then you can use the lock

function by entering a key password.

Authentication operation

1. In the standby screen, an icon that looks like the finger selected

by the user for ” Fingerprint for Authentication” will be displayed.

2. Press the key to view the window for fingerprint

authentication.

3. You can unlock the handset either by keying in the current

password or by using the fingerprint authentication If you don’t

want to execute the fingerprint authentication, press any digit

key. Then you can execute the password authentication by

keying.

4. Once the fingerprint for authentication has been set, it becomes

activated either when you enter the Fingerprint Menu again or

enter the Menu tree set in the Handset lock or Privacy Setting.

5. You can set only one of the 10 fingerprints. And it is the same

fingerprint used in the Privacy mode.