User Guide

Scan while matching the centerline of finger to the center line of

the sensor .

2. Scan at the appropriate speed.

3. Do not bend your finger until scanning is done.

Setting

Sets the security level to be used in the fingerprint

registration and authentication process. The higher

the security level, the stricter the authentication

process.

- Enrollment Level

This is the security level used when registering a

fingerprint.

•

Low: It is the lowest security level.

• Normal: This is the factory-set default value. This is the normal

security level.

•

High: This is the highest security level.

- Auth Level

This is the security level used when authenticating a fingerprint.

• Low: It is the lowest security level.

•

Normal: This is the factory-set default value. This is the normal

security level.

• High: This is the highest security level.

<TIP>

If you experience difficulty with fingerprint registration or

authentication, set the level to low and try to register/authenticate.

SETTINGS