User Manual

Select ‘Menu>7.Organiser>6.Converter’.

Converter converts a figure between different unit in Length, Area,

Volume, Weight, and Temperature.

Select one among Length, Area, Volume, Weight, or Temperature.

Press the [Down] key to move to the next line, press the [Left/Right] key

to select a target unit, and press number keys to input numbers.

Press the [Down] key again to move to the next line and select a result

unit and you will get a right answer.

* Tip: The result is automatically recalculated upon change of unit or

value.

Press the [Right] Soft key to input a decimal point.

7.7 Stop Watch

Select ‘Menu>7.Organiser>7.Stop Watch’

Stop Watch measures the time for all sorts of sports.

Press to operate Stop Watch.

Press to pause Stop Watch and press to restart Stop Watch.

Whenever you select the [Lap] Soft key, the 4 lap times as a maximum

are displayed and when you select the fourth [Lap], Stop Watch stops.

Press the [Reset] Soft key to initialize all.

7.8 Timer

Select ‘Menu>7.Organiser>8.Timer.’

Sets alarm bell to ring at a preset time.

Press the [Set] Soft key to input a time and minute for countdown and

press the [OK] key for setup.

Press after input and the displayed time will be counted down. Now,

press to pause countdown and press to restart countdown.

After the preset time, an additional animation and alarm sound will be

provided. Press the [Stop] Soft key to pause both.

Press the [Set] Soft key to return to the initial state while Timer is out of

operation.