User Manual

49
- Read Reports
When this option sets to [On], receiver’s phone sends a
reply to let you know when your message was read by
her/him.
- Read Rep. Allow
When this option sets to [Off], your phone does not send a reply
to the receiver’s phone even if the sender asks for the read
confirmation reply.
- Spam Filter
When this option sets to [On], you can reject advertisement
message from the service provider
You can select one of Off / Prompt if Spam / Reject Spam.
1.2.8 MMS Profiles
Select ‘Menu>1.Messages>2.Multimedia Msgs.>7.MMS Profiles’ and
press the [OK] key.
Select ‘MMS Profiles’ and press the [OK] key to display the current
profile list. Unedited profiles will not be selected. Choose a profile to edit
and press the [Edit] Soft key, and then the ‘Edit Profile’ window will pop
up.
- Profile Name: Input the profile name.
- MMS Centre: Input the connection URL.
- GSM Setting: Set up the GSM environment.
- Gateway
- IP Address: Input the IP address. A comma will be added
every 3 digits.
- IP Port: Input the IP port number for yourself.
- Login ID: Input the ID to sign into the gateway.
- Password: Input the password to sign into the gateway.
- Data Call Type: Press the [Left/Right] key to choose either ISDN
or Analogue.
- Dial Number: Input the dial number manually
- Login ID: Input the ID to sign into the GSM.
- Password: Input the password to sign into the GSM.
- GPRS Setting: Set up the GPRS environment.
- Gateway
- IP Address: Input the IP address. A comma will be added
every 3 digits.
- IP Port: Input the IP port number for yourself.
- Login ID: Input the ID to sign into the gateway.
- Password: Input the password to sign into the gateway.
- APN: Input the Access Point Name for yourself.
- Login ID: Input the ID to sign into the GPRS.
- Password: Input the password to sign into the GPRS.
- Bearer: Press the [Left/Right] key to choose either GPRS Only
/ GSM Only.
- Reset Profile: Deletes all the profiles in possession.